Distributeur OfficielBy ABB
SKU
MPN
1SFA897102R7000
Weight
3.243 kg
The softstarter PSE25-600-70 has a rated maximum operational current of 25 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general purpose softstarter. It’s a perfect balance between high starting capacity and cost efficiency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.
Spécifications techniques
Dimensions
| Produit Largeur Net | 90 mm |
| Produit Hauteur Net | 245 mm |
| Produit Longueur Net | 184 mm |
| Poids net | 2,5 kg |
Technique
| Tension | 208 ... 600 V AC |
| Rated Control Supply Voltage (Us) | 100 ... 250 V AC |
| Rated Control Circuit Voltage (Uc) | 24 V DC |
| Fréquence assignée (f) | 50/60 Hz, Circuit principal 50 / 60 Hz |
| Rated Operational Power - In-Line Connection (Pe) | (230 V) 5.5 kW, (400 V) 11 kW, (500 V) 15 kW |
| Courant nominal de fonctionnement-- Raccordement en ligne (Ie) | 25 A |
| Pourcentage Facteur de service | 100 % |
| Overload Protection | Build-in electronic overload protection |
| Integrated Electronic Overload | Oui |
| Adjustable Rated Motor Current Ie | 30 ... 100 % |
| Starting Capacity at Maximum Rated Current Ie | 4xIe for 10s |
| Ramp Time | 0 ... 30 second [unit of time], 1 ... 30 second [unit of time] |
| Initial Voltage During Start | 30 ... 70 % |
| Step Down Voltage Special Ramp | No % |
| Current Limit Function | 1.5 ... 7xIe |
| Switch for Inside Delta Connection | Non |
| Run Signal Relay | Oui |
| By-pass Signal Relay | Oui |
| Fault Signal Relay | Oui |
| Overload Signal Relay | Oui |
| Sorties analogiques | 4…20 mA |
| Signal Indication Completed Start Ramp (LED) | Vert |
| Signal Indication Ready to Start/Standby ON (LED) | Vert |
| Voyant de signal indiquant R (LED) | Vert |
| Signal Indication Ramping Up/Down (LED) | Vert |
| Signal Indication Protection (LED) | Jaune |
| Signal Indication Fault (LED) | Rouge |
| Number of Starts Per Hour at 3.5*Ie for 7 sec. 50% ON Time 50% OFF Time | 10 |
| Communication | Modbus-RTU |
| Indice de protection | IP00 |
| Type de borne | Bornes à vis |
| Connecting Capacity Main Circuit | Hole Diameter 8.5 mm, Rigid 1/2 x 2.5 ... 70 mm², Width and Thickness 17.5x5 mm |
| Connecting Capacity Control Circuit | Rigid 1 x 2.5 mm², Rigid 2 x 1.5 mm² |
| Connecting Capacity Supply Circuit | Rigid 1 x 2.5 mm² |
| Couple de serrage | Control Circuit 0.5 N·m, Main Circuit 9 N·m, Supply Circuit 0.5 N·m |
| Groupe de produit | PSE25 |
| Fonction | Soft start with torque control, Soft start with voltage ramp, Soft stop with torque control, Soft stop with voltage ramp, Kick start, Sequence start, Current limit, Start reverse (external contactors), Automatic restart, Event log |
| Protection Function | Electronic overload protection, EOL; Locked rotor protection; Current underload protection |
Technique UL/CSA
| Maximum Operating Voltage UL/CSA | Circuit principal 600 V |
| Tightening Torque UL/CSA | Control Circuit 4.4 in·lb, Main Circuit 79.7, Supply Circuit 4.4 in·lb |
Environnement
| Température de l’air ambiant | Operation -25 ... +60 °C, Storage -40 ... +70 °C |
| Statut RoHS | Following EU Directive 2002/95/EC August 18, 2005 and amendment |
Pourquoi Proax pour ABB PSE25-600-70?
Proax est un distributeur autorisé de ABB PSE25-600-70 et l'un des plus grands distributeurs de ABB en Amérique du Nord. Notre équipe technique interne, qui est hautement qualifiée, est prête à répondre à vos besoins techniques!
Avez-vous une question? pour vous aider à obtenir le bon produit le plus rapidement possible pour votre projet. Nous sommes toujours là pour vous aider!
Délai de livraison court
Personnel qualifié
Chat en direct
Support technique
Inventaire local
60+ ans d'expérience
Informations complémentaires
| Autres noms | PSE2560070 |
| Taille de l'emballage | 1 |
Recommandé
The softstarter PSE250-600-70-1 has a rated maximum operational current of 250 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general purpose softstarter. It’s a perfect balance between high starting capacity and cost efficiency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.
