Distributeur OfficielBy ABB
SKU
MPN
1SCA141976R1001
Weight
0.181 kg
OTDC32U2 PV Disconnect Switch, Terminal bolt kit included, Handle and shaft need to be ordered separately, Base mounting, IEC 660 VDC 32 A single circuit, IEC 1000 VDC 20 A single circuit
Spécifications techniques
Circular Value
| Conflict Minerals Reporting Template (CMRT) | 9AKK108467A5658 |
| REACH Declaration | 1SCC301240D0201 |
| Informations RoHS | 1SCC301239D0201 |
Dimensions
| Dimensions Cadre du produit | XS |
| Produit Largeur Net | 54.8 mm, 2.2 in |
| Produit Hauteur Net | 89 mm, 3.5 in |
| Produit Longueur Net | 63.7 mm, 2.5 in |
| Poids net | 0.2 kg, 0.4 lb |
Technique
| Rated Operational Current DC-21B (Ie) | (660 V) 32 A, (1000 V) 20 A |
| Courant thermique conventionnel à l’air libre (Ith) | q = 40 °C 63 A |
| Conventional Thermal Current (Ithe) | Fully Enclosed 50 A |
| Tension assignée de tenue aux chocs (Uimp) | 8 kV |
| Tension assignée d’isolement (Ui) | 1000 V |
| Tension | 1000 V |
| Rated Short-Circuit Making Capacity (Icm) | (1000 V DC) 1 kA |
| Courant assigné de courte durée admissible (Icw) | (1000 V DC) 1 kA, for 1 s 1 kA |
| Power Loss | at Rated Operating Conditions per Pole 0.35 W |
| Degré de pollution | 3 |
| Handle Type | Handle and shaft not included |
| Positive Opening Operation Torque (Direct Opening Action) | 0.4 … 0.8 N·m |
| Diamètre d'arbre | 6 mm, 0.24 in |
| Switches Operating Mechanism | Mechanism on Top of the Switch |
| Position of Line Terminals | Top In - Bottom Out, Bottom In - Top Out |
| Mode de fonctionnement | Front Operated |
| Normes et standards | IEC 60947-1, -3 |
| Fonctions spéciales | Non |
| Type de montage | Base mounting, DIN-rail mounting |
| Nombre de pôles | 2 |
| Section de câble | 2.5 ... 16 mm², 12 ... 6 AWG |
| Indice de protection | Front IP20 |
| Type de borne | Bornes à vis |
| Couple de serrage | 1.2 … 1.4 N·m |
| Utilization | Photovoltaic |
| Utilization Category | Switching of resistive loads, including moderate overloads - occasional actuation (DC-21B) |
Technique UL/CSA
| Couple de serrage | 1.2 … 1.4 N·m |
Environnement
| Statut RoHS | Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019 |
Pourquoi Proax pour ABB OTDC32U2?
Proax est un distributeur autorisé de ABB OTDC32U2 et l'un des plus grands distributeurs de ABB en Amérique du Nord. Notre équipe technique interne, qui est hautement qualifiée, est prête à répondre à vos besoins techniques!
Avez-vous une question? pour vous aider à obtenir le bon produit le plus rapidement possible pour votre projet. Nous sommes toujours là pour vous aider!
Délai de livraison court
Personnel qualifié
Chat en direct
Support technique
Inventaire local
60+ ans d'expérience
Informations complémentaires
| Taille de l'emballage | 1 |
Recommandé
OTDC32U4 PV Disconnect Switch, Terminal bolt kit included, Handle and shaft need to be ordered separately, Base mounting, UL 600 VDC 32 A double circuit, IEC 660 VDC 32 A double circuit, IEC 1000 VDC 20 A double circuit
OTDC32U6 PV Disconnect Switch, Terminal bolt kit included, Handle and shaft need to be ordered separately, Base mounting, UL 600 VDC 32 A triple circuit, IEC 660 VDC 32 A triple circuit, IEC 1000 VDC 20 A triple circuit- OTDC32US4 PV Disconnect Switch, Terminal bolt kit included, Handle and shaft need to be ordered separately, Base mounting, US single-wire break, UL 600 VDC 32 A double circuit, IEC 660 VDC 32 A double circuit, IEC 1000 VDC 20 A double circuit
OTDC32UT4 PV Disconnect Switch, Terminal bolt kit included, Handle and shaft need to be ordered separately, Door mounting, UL 600 VDC 32 A double circuit, IEC 660 VDC 32 A double circuit, IEC 1000 VDC 20 A double circuit
OTDC32F4 DC Switch-disconnector, Terminal bolt kit included, Handle and shaft need to be ordered separately, Base mounting, IEC 660 VDC 32 A double circuit, IEC 1000 VDC 20 A double circuit