Distributeur OfficielBy ABB
SKU
MPN
1SBN040100R1013
Weight
0.077 kg
Prendre note que cet item est Non Cancellable / Non Retournable
WA4-13 is a mechanical latching unit for AF09(Z) ... AF65, AFC09...38 contactors and NF(C)(Z) contactor relays ensuring that the contactor or contactor relay remains switched on even if there is a lack or a failure of voltage, in application such as energy conservation. Standard contactors can be easily converted into compact latched contactors. The WA4 block contains a mechanical latching device with electromagnetic impulse unlatching (AC or DC) or manual unlatching.
Select quickly the WA4 coil thanks to an unlimited choice of control voltages (e.g. 100, 110, 115, 120, 125, 127, 208, 220, 230, 240 V 50/60 Hz - DC) included inside a large range of voltages from 100 to 250 V 50/60 Hz - DC.
• Extend your auxiliary control circuit by adding additional 1-pole front mounted CA4 and 2-pole side mounted CAL4 auxiliary contact blocks
• Design easily your installation with 25% less depth required in panel mounting
• Reduce your stock and increase your solution proposal with 50% of less variants required compared to conventional solutions.
Spécifications techniques
Dimensions
| Produit Largeur Net | 19,8 mm |
| Produit Longueur Net | 67,4 mm |
| Produit Hauteur Net | 41 mm |
| Poids net | 0,065 kg |
Technique
| Coil Consumption | Pull-in DC (Umin / Umax) 15 ... 100 W |
| Connecting Capacity Control Circuit | Flexible with Ferrule 1/2x 0.75 ... 2.5 mm², Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm², Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm², Rigid 1/2x 1 ... 2.5 mm² |
| Rated Control Circuit Voltage (Uc) | 50 Hz 100 ... 250 V, 60 Hz 100 ... 250 V, DC Operation 100 ... 250 V |
| Adapté pour | AF09, AF09Z, AF12, AF12Z, AF16, AF16Z, AF26, AF26Z, AF30, AF30Z, AF38, AF38Z, AF40, AF52, AF65, NF22E, NFZ22E, NF31E, NFZ31E, NF40E, NFZ40E |
| Type de borne | Bornes à vis |
| Couple de serrage | Control Circuit 1.2 N·m |
| Wire Stripping Length | Control Circuit 10 mm |
Technique UL/CSA
| Tightening Torque UL/CSA | Control Circuit 11 in·lb |
Environnement
| Informations RoHS | 2CMT2021-006277 |
| DEEE B2C / B2B | Business To Business |
Pourquoi Proax pour ABB WA4-13?
Proax est un distributeur autorisé de ABB WA4-13 et l'un des plus grands distributeurs de ABB en Amérique du Nord. Notre équipe technique interne, qui est hautement qualifiée, est prête à répondre à vos besoins techniques!
Avez-vous une question? pour vous aider à obtenir le bon produit le plus rapidement possible pour votre projet. Nous sommes toujours là pour vous aider!
Délai de livraison court
Personnel qualifié
Chat en direct
Support technique
Inventaire local
60+ ans d'expérience
Informations complémentaires
| Autres noms | WA413 |
| Taille de l'emballage | 1 |
Recommandé
The WA4 mechanical latching unit for AF09 ... AF96 contactors and NF contactor relays ensures that the contactor or contactor relay remains switched on even if there is a lack or a failure of voltage. Standard contactors can be easily converted into compact latched contactors.The WA4 block contains a mechanical latching device with electromagnetic impulse unlatching (AC or DC) or manual unlatching.OperationAfter closing, the contactor continues to be held in the closed position by the latching mechanism should the supply voltage fail at the contactor coil terminals.Contactor opening can be controlled:• electrically by an impulse (AC or DC) on the WA4 block coil (the coil is not designed to be permanently energized)• manually by pressing the pushbutton on the front face of the WA4 block.MountingThe WA4 block is clipped onto the front face of the 1-stack contactor where it takes up two slots in central position (see fig. below).The two other slots may accept CA4 single pole auxiliary contacts (1 block on each side of the mechanical latch).Additional CAL4 can be fitted on the side of the contactor in respect to the total number of built-in or additional N.O. and N.C. auxiliary contacts as described in the accessory fitting details part of each contactor type.- The WA4 mechanical latching unit for AF09 ... AF96 contactors and NF contactor relays ensures that the contactor or contactor relay remains switched on even if there is a lack or a failure of voltage. Standard contactors can be easily converted into compact latched contactors.The WA4 block contains a mechanical latching device with electromagnetic impulse unlatching (AC or DC) or manual unlatching.OperationAfter closing, the contactor continues to be held in the closed position by the latching mechanism should the supply voltage fail at the contactor coil terminals.Contactor opening can be controlled:• electrically by an impulse (AC or DC) on the WA4 block coil (the coil is not designed to be permanently energized)• manually by pressing the pushbutton on the front face of the WA4 block.MountingThe WA4 block is clipped onto the front face of the 1-stack contactor where it takes up two slots in central position (see fig. below).The two other slots may accept CA4 single pole auxiliary contacts (1 block on each side of the mechanical latch).Additional CAL4 can be fitted on the side of the contactor in respect to the total number of built-in or additional N.O. and N.C. auxiliary contacts as described in the accessory fitting details part of each contactor type.
- The WA4 mechanical latching unit for AF09 ... AF96 contactors and NF contactor relays ensures that the contactor or contactor relay remains switched on even if there is a lack or a failure of voltage. Standard contactors can be easily converted into compact latched contactors.The WA4 block contains a mechanical latching device with electromagnetic impulse unlatching (AC or DC) or manual unlatching.OperationAfter closing, the contactor continues to be held in the closed position by the latching mechanism should the supply voltage fail at the contactor coil terminals.Contactor opening can be controlled:• electrically by an impulse (AC or DC) on the WA4 block coil (the coil is not designed to be permanently energized)• manually by pressing the pushbutton on the front face of the WA4 block.MountingThe WA4 block is clipped onto the front face of the 1-stack contactor where it takes up two slots in central position (see fig. below).The two other slots may accept CA4 single pole auxiliary contacts (1 block on each side of the mechanical latch).Additional CAL4 can be fitted on the side of the contactor in respect to the total number of built-in or additional N.O. and N.C. auxiliary contacts as described in the accessory fitting details part of each contactor type.
- The WA4 mechanical latching unit for AF09 ... AF96 contactors and NF contactor relays ensures that the contactor or contactor relay remains switched on even if there is a lack or a failure of voltage. Standard contactors can be easily converted into compact latched contactors.The WA4 block contains a mechanical latching device with electromagnetic impulse unlatching (AC or DC) or manual unlatching.OperationAfter closing, the contactor continues to be held in the closed position by the latching mechanism should the supply voltage fail at the contactor coil terminals.Contactor opening can be controlled:• electrically by an impulse (AC or DC) on the WA4 block coil (the coil is not designed to be permanently energized)• manually by pressing the pushbutton on the front face of the WA4 block.MountingThe WA4 block is clipped onto the front face of the 1-stack contactor where it takes up two slots in central position (see fig. below).The two other slots may accept CA4 single pole auxiliary contacts (1 block on each side of the mechanical latch).Additional CAL4 can be fitted on the side of the contactor in respect to the total number of built-in or additional N.O. and N.C. auxiliary contacts as described in the accessory fitting details part of each contactor type.