S802N-C10
Distributeur OfficielBy ABB
SKU
ABBS802NC10
MPN
2CCS892001R0104
Weight
0.49 kg
The S802N-C10 is a 2-pole High Performance Circuit breaker with C-characteristic, with cage terminal and a rated current of 10 A. It is a current limiting device with a maximum breaking capacity of 36kA at 240/415V. It can be used for voltages up to 400/690V and in DC as well. It has two different tripping mechanisms, the thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. The S802N-C10 complies with IEC/EN 60898-1 and IEC/EN 60947-2 and allows the use for residential, commercial and industrial applications. It has numerous of approvals, therefore it can be used worldwide. The extensive range of accessory makes the use of S802N-C10 more comfortable. Due to the fast arc extinction of S802N-C10 your application will be secured.
Spécifications techniques
Technique
| Normes et standards | IEC/EN 60947-2, IEC/EN 60898-1 |
| Tripping Characteristic | C |
| Type of Residual Current | standard version |
| Tension nominale (Ur) | acc. to IEC 60947-2 690 V AC, acc. to IEC 60947-2 250 V DC, acc. to IEC 60898-1 400 V AC |
| Tension | acc. to IEC 60947-2 690 V AC, acc. to IEC 60947-2 250 V DC, acc. to IEC 60898-1 400 V AC |
| Operational Voltage | Maximum 230/400 V AC, Minimum 12 V AC |
| Tension assignée d’isolement (Ui) | acc. to IEC/EN 60664-1 690 V |
| Tension assignée de tenue aux chocs (Uimp) | 8 kV |
| Type de tension | AC/DC |
| Courant nominal (IN) | 10 A |
| Courant nominal de fonctionnement (Ie) | 10 A |
| Rated Short-Circuit Capacity | (400 V) 20 kA, (230 V) 20 kA |
| Pouvoir assigné de coupure ultime en court-circuit (Icu) | (240 / 415 V AC) 36 kA, (254 / 440 V AC) 20 kA, (400 / 690 V AC) 4.5 kA, (250 V DC) 20 kA, (230 V) 36 kA |
| Rated Conditional Short-Circuit Current (Inc) | (230 V) 36 kA, (400 V) 36 kA |
| Pourvoir assigné de coupure de service en court-circuit (Ics) | (240 / 415 V AC) 30 kA, (254 / 440 V AC) 15 kA, (400 / 690 V AC) 3 kA, (125 V DC) 20 kA |
| Fréquence (f) | 50 ... 60 Hz |
| Fréquence assignée (f) | 50...60 Hz |
| Power Loss | 3 W, at Rated Operating Conditions per Pole 1.5 W |
| Contact Position Indication | ON / OFF / TRIP |
| Classe de limitation d'énergie | 3 |
| Electrical Endurance | 10000 cycle |
| Mechanical Endurance | 10000 cycle |
| Nombre de pôles | 2 |
| Number of Protected Poles | 2 |
| Catégorie de surtension | IV |
| Couple de serrage | 3.5 N·m, 31 in·lb |
| Type de libération | C |
| Actuator Marking | I / O |
| Qualité du matériau | Insulation group I, RAL 7035 |
| Montage sur rail DIN | TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715, TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715 |
| Type d'encastrement | tous |
| Recommended Screw Driver | Pozidriv 2 |
| Accessories Available | Oui |
| Remarques | Connection from top and bottom, Connecting with CU only, IP40 in enclosure with cover, Cage terminal with captive screw |
| Connecting Capacity | Flexible 0...50 mm², Rigid 0...70 mm² |
| Type de borne | Bornes à vis |
Environnement
| Température extérieure | -25...60 °C |
| Température de l’air ambiant | Operation -25...60 °C |
| Reference Ambient Air Temperature | acc. to IEC60947-2 30 °C, acc. to EN60898-1 30 °C |
| Indice de protection | IP20 |
| Degré de pollution | 3 |
| Resistance to Vibrations acc. to IEC 60068-2-6 | 2 - 13.2 Hz / 1mm, 13.2 - 100Hz / 0.7g, with load 100% x Ie |
| Résistance aux chocs selon CEI 60068-2-27 | 5 g, 30 ms |
| Statut RoHS | Following EU Directive 2011/65/EU |
Dimensions
| Width in Number of Modular Spacings | 3 |
| Produit Largeur Net | 54 mm |
| Produit Hauteur Net | 95 mm |
| Produit Longueur Net | 82,5 mm |
| Poids net | 490 g |
| Taille | 2 modules |
| Profondeur d'encastrement (t2) | 82,5 mm |
Pourquoi Proax pour ABB S802N-C10?
Proax est un distributeur autorisé de ABB S802N-C10 et l'un des plus grands distributeurs de ABB en Amérique du Nord. Notre équipe technique interne, qui est hautement qualifiée, est prête à répondre à vos besoins techniques!
Avez-vous une question? pour vous aider à obtenir le bon produit le plus rapidement possible pour votre projet. Nous sommes toujours là pour vous aider!
Délai de livraison court
Personnel qualifié
Chat en direct
Support technique
Inventaire local
60+ ans d'expérience
Informations complémentaires
| Autres noms | S802NC10 |
| Taille de l'emballage | 1 |
Meilleurs vendeursdans Spécialité MCB
S803HV-K1 3 Poles K Characteristic 1A 1.5 kA 580/1000 VAC High Performance Circuit Breaker HPCB
The S803S-C25 is a 3-pole High Performance Circuit breaker with C-characteristic, with cage terminal and a rated current of 25 A. It is a current limiting device with a maximum breaking capacity of 50kA at 240/415V. It can be used for voltages up to 400/690V and in DC as well. It has two different tripping mechanisms, the thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. The S803S-C25 complies with IEC/EN 60898-1 and IEC/EN 60947-2 and allows the use for residential, commercial and industrial applications. It has numerous of approvals, therefore it can be used worldwide. The extensive range of accessory makes the use of S803S-C25 more comfortable. Due to the fast arc extinction of S803S-C25 your application will be secured.
The S803HV-K6 is a 3-pole High Performance Circuit breaker with K-characteristic, with cage terminal, long separating plates and a rated current of 6 A. It is a current limiting device with a maximum breaking capacity of 4kA at 580/1000V. It has two different tripping mechanisms, the thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. The S803HV-K6 complies with IEC/EN 60947-2 and allows the use for industrial applications. It can be used worldwide. The extensive range of accessory makes the use of S803HV-K6 more comfortable. Due to the fast arc extinction of S803HV-K6 your application will be secured.
The S803S-C10 is a 3-pole High Performance Circuit breaker with C-characteristic, with cage terminal and a rated current of 10 A. It is a current limiting device with a maximum breaking capacity of 50kA at 240/415V. It can be used for voltages up to 400/690V and in DC as well. It has two different tripping mechanisms, the thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. The S803S-C10 complies with IEC/EN 60898-1 and IEC/EN 60947-2 and allows the use for residential, commercial and industrial applications. It has numerous of approvals, therefore it can be used worldwide. The extensive range of accessory makes the use of S803S-C10 more comfortable. Due to the fast arc extinction of S803S-C10 your application will be secured.
The S803S-D16 is a 3-pole High Performance Circuit breaker with D-Characteristic, with cage terminal and a rated current of 16 A. It is a current limiting device with a maximum breaking capacity of 50kA at 240/415V. It can be used for voltages up to 400/690V and in DC as well. It has two different tripping mechanisms, the thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. The S803S-D16 complies with IEC/EN 60898-1 and IEC/EN 60947-2 and allows the use for residential, commercial and industrial applications. It has numerous of approvals, therefore it can be used worldwide. The extensive range of accessory makes the use of S803S-D16 more comfortable. Due to the fast arc extinction of S803S-D16 your application will be secured.
The S803S-D10 is a 3-pole High Performance Circuit breaker with D-Characteristic, with cage terminal and a rated current of 10 A. It is a current limiting device with a maximum breaking capacity of 50kA at 240/415V. It can be used for voltages up to 400/690V and in DC as well. It has two different tripping mechanisms, the thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. The S803S-D10 complies with IEC/EN 60898-1 and IEC/EN 60947-2 and allows the use for industrial applications. It has numerous of approvals, therefore it can be used worldwide. The extensive range of accessory makes the use of S803S-D10 more comfortable. Due to the fast arc extinction of S803S-D10 your application will be secured.
The S800-RHE-EM is a black rotary handle for door assembly. It has to be used together with S800-RD the rotary drive adapter for 2- to 4-pole S800.For an extension you can use the S800-RHE-S the axial extension with a length of 500m and a diameter of 6 x 6mm.
