Interrupteurs industriels

Type de connexion des fils volants Actionneur sans contact

Type d'actionneur à poussoir Interrupteur de fin de course fermé

M20 Conduit Size Guard Lock Safety Door Switch

Clé de maintien

The JSHD4-2-AB is an ergonomic three-position device which top part has LEDs, a front button and a top button, and which bottom part is equipped with a Cannon connector. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4H2 0.15m is a three-position device for internal panel mounting with 6 leads, each 150mm long.Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

Magne 4 DYN-Info is an electromagnetic lock providing safe interlocking thanks to an integrated ADAM DYN-Info safety sensor. Its M12-8 connector facilitates connexion. A +24VDC voltage is used for the locking. The holding force is up to 1500N and the protection class IP67. A combined "Locked and Closed" information output is available. The Eva actuactor and the anchor plate must be ordered separately.Magne is an electromagnetic process lock intended for locking doors and hatches. It is usually used to prevent unwanted process interruptions, e.g. during a welding operation. With Adam and Eva, a PLe can be reached for the interlocking function.

1 contact normalement fermé (NC)/1 contact normalement ouvert (NO) (action rapide) Configuration des contacts Interrupteur de fin de course de sécurité

Adam C OSSD-Info M12-5 Sensor

TERMINAL SCREEN 3P 400A NF

TERMINAL SCREEN 3P 400A NF

G1/2 Conduit Size Compact Guard Locking Safety Switch

Actionneur à poussoir à galet Type d'interrupteur de fin de course

Type de connexion des fils volants Actionneur sans contact

Centre Neutre Côté Interrupteur rotatif de fin de course

Actionneur à poussoir scellé Type d'interrupteur de fin de course fermé

Support de montage

JSHD4 AJ is a JSHD4 bottom part with a cable gland and PCB with 16 screw connections. It is used with any JSHD4 top part, except JSHD4-1, to form a complete three-position device. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

Enclosed Switch Disconnector, 3-p. Max. Horse power rating at three phase 480V 10HP. General purpose current rating 16A. Plastic enclosure, NEMA Type 4/4X Watertight, Pistol handle. Interlocked cover. Defeatable interlocking.

LMS, INTERRUPTEUR DE PORTE DE SÉCURITÉ, 1NC/ 1NO