Interrupteurs industriels

Safety magnetic switch complete with actuator, 2NC+1NO (guard closed and actuator present), stainless steel, LED, 10m cable (8 leads).Sense7 is a coded magnetic non-contact switch for interlocking gates and hatches, or other moveable parts. Sense7 has a stainless steel housing that is designed for harsh environments and extreme temperatures. Sense7 offers an interlocking function reaching up to PL e/SIL3 with low level coding.

Anchor plate with permanent magnet. Holding force: 30N. Delivered with cellular rubber.A permanent magnet keeps the door/hatch closed when the Magne is unlocked. The door can still easily be opened. 2 mounting holes.

PS-4256-12-DDP Encoder Absolute Sourcing Gray Code

Eden is a non-contact safety sensor used as interlocking device for e.g. doors and safe position monitoring. Eva actuator for use with Adam DYN and Adam OSSD sensors. With Eva unique Code, the pair forms a high level coded non-contact safety sensor. Four pieces of DA 2B spacer rings are included.Adam senses the presence of Eva without mechanical contact and therefore without any wear. The compact size of Eden and its 360°mounting possibility make it easy to use in most applications.Eden is UL approved for use in US and Canada.

LS35P41B11 is a 30 mm wide, standard Limit Switch made of fiber-glass reinforced UL-V0 material, with 2 mounting holes at the top, 1 1/2'' NPT cable entry on the bottom, plastic roller lever (Ø18 mm) actuator and 1 N.O + 1 N.C snap action (Zb type) contacts

Poignée pour sectionneur L11-30..60A, pistolet, ROUGE/YEL, Nema 12/4/4X, IP66

1/2-14 National Pipe Thread (NPT) Conduit Size Guard Lock Safety Door Switch

Kit de clé coulissante avec levier intérieur pour l'interrupteur D4SL-N

Clé à glissière

Type de connexion des fils volants Actionneur sans contact

AUXILIARY SWITCH 30A 240V

1/2-14 National Pipe Thread (NPT) Conduit Size Compact Guard Locking Safety Switch

Interrupteur de fin de course du levier d'oscillation

Magne 3X M12-5 is an electromagnetic lock with a M12-5 male connector. A +24VDC voltage is used for the locking. The holding force is up to 1500N and the protection class IP67. An anchor plate must be ordered separately.

Clé de fonctionnement pour montage vertical de l'interrupteur D4SL-N

JSTD1-A is a Safeball with two contacts, 1NO and 1NC, and a 2 m long cable (4 conductors). Its ergonomic design provides several grip possibilities, a low activation force of approximately 2N, and flexible mounting possibilities. This model allows a maximum load of 30VDC, 2A resistive. It offers an IP67 protection degree. Its body is made of polypropylene.Safeball is an ergonomic control device consisting of a spherical ball containing two pushbuttons, one on each side of the ball. Both buttons must be pressed in order to start and operate the machine. The risk of unintentional activation is thereby minimized Usually two Safeball are used together to form a two-hand control, and the operator must press all four push buttons simultaneously in order to operate the machine. If one or more of the buttons are released, a stop signal is given to the machine.

30A 3P HD N1 600V NONFUSE SW

Commutateur de sécurité sans contact jusqu'à Cat. 4, PL e (EN ISO 13849), SIL 3 (CEI 61508), Capteur multicode à détrompage RFID, Format 4 (EN ISO 14119), démarrage automatique ou manuel, diagnostic intégré, alimentation 24 V DC, IP69K, connecteur M12

Actionneur à levier à galet Configuration des contacts unipolaires et bipolaires (SPDT) Interrupteur de fin de course

Disconnect, J Fusible, 30A, 3 Pole