Composants de distribution et de protection électrique

TMPC3L4R - CSA METERMOD,3PH,400A,TOP/BOT,MLO

DIN adapter use for SMISSLINE TP system 125A or 250A. Wire 300mm top feed moveable for L1 or L2 or L3

DIN adapter use for SMISSLINE TP system 125A or 250A. Wire 300mm top feed moveable for L1 or L2 or L3

OZXA-804 Mechanical Lug Kit - Mechanical lug for wire range 2x AWG 6 - 300MCM. Suitable for DC Switch M-series: OTDC250UF_ - OTDC1000UF_ and OTDC315F_ - OTDC1000F_. Package of 4 pcs., including screws and nuts.

A fully optimized six-pole DC switch-disconnector for 1000V utility-scale photovoltaic power plants covering 315-500A current range. The new design offers both a size reduction and an increase in efficiency and performance. The six-pole 1000V DC Switch helps manufacturers improve system efficiency. The compact size of the new OTDC range makes it possible for manufacturers to reduce the size of combiner boxes and inverters.Main characteristics of this particular OTDC type:Disconnect triple PV circuit, Approved according to IEC 60947-1, -3

OXP6X360-45 SHAFT for pistol handle

OHB65J6E65 Handle

General purpose encapsulated open core, and coil transformer (also known as Type IP Control Power transformers) are ideally suited for industrial and light-duty loads, HVAC applications, signal and alarm systems, industrial control panels, lighting, and circuit isolation. The optional fuse block adapter kits enable input and output flexibility. Type IP Control Power transformers are an economical alternative to high in-rush/machine tool transformers.

3P SW 800A L FUSE FLANGE CABLE

3P SW 800A NF FLANGE CABLE

PSTL HDL RST STD 125MM UL N4 4X

The EPD24 protection devices expand ABB's product portfolio of DIN rail mounted devices with electronic overcurrent protection modules for selective protection of 24 V DC load circuits. Faults in individual branches caused by overload or short circuit are detected and selectively switched off so that other load current paths remain unaffected by the fault. In this way straightforward, quick troubleshooting is made possible.

3-pole, front operated, base mounted non-fusible diconnect switch, handle and shaft are not included, terminal bolt kit included

3-pole, front operated, door mounted switch-diconnector with protected clamp terminals, handle and shaft are not included

4-pole, front operated, base mounted, DIN-rail mountable switch-diconnector / non-fusible diconnect switch with protected clamp terminals, handle and shaft are not included

The EPD24 protection devices expand ABB's product portfolio of DIN rail mounted devices with electronic overcurrent protection modules for selective protection of 24 V DC load circuits. Faults in individual branches caused by overload or short circuit are detected and selectively switched off so that other load current paths remain unaffected by the fault. In this way straightforward, quick troubleshooting is made possible.

OTDC100U33 PV Disconnect Switch, Handle and shaft not included, Base mounting, IEC&UL 100 A 1000V

These GE transformers feature encapsulated core and coils in a NEMA 3R non-ventilated weatherproof enclosure -UL Listed -C-UL Listed-Knockouts provided on back and bottom-High grade silicon steel coreMounting holes on side for easy access-Wiring compartment includes ground stud 1004G02

These GE transformers feature encapsulated core and coils in a NEMA 3R non-ventilated weatherproof enclosure -UL Listed -C-UL Listed-Knockouts provided on back and bottom-High grade silicon steel coreMounting holes on side for easy access-Wiring compartment includes ground stud 1005G02

General purpose encapsulated open core, and coil transformer (also known as Type IP Control Power transformers) are ideally suited for industrial and light-duty loads, HVAC applications, signal and alarm systems, industrial control panels, lighting, and circuit isolation. The optional fuse block adapter kits enable input and output flexibility. Type IP Control Power transformers are an economical alternative to high in-rush/machine tool transformers.