Contacteurs

NFZ contactor relays are used for switching auxiliary and control circuits. NFZ contactor relays include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...250 V 50/60 Hz or 12...250 V DC. NF contactor relays can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change NFZ contactor relays allow direct control by PLC-output ≥ 24 V DC 500 mA and obtain a reduced holding coil consumption. NFZ contactor relays withstand short voltage dips and voltage sags (SEMI F47-0706 compliance) between 24...250 V 50/60 Hz NFZ contactor relays have built-in surge protection and do not require additional surge suppressors - Poles: 4-pole contactor relays (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1 and including the "Mechanically Linked" symbol on the contactor relay side) - Control Circuit: AC or DC operated - Accessories: a wide range of Accessories is available.

AF96-30-11-13 100-250V50/60HZ-DC Contactor

CR463 ,Electrically Held,2NO - 0NC Poles , - 230-240V 60hz , 220V 50hz coil,,,, Lights

The AF26N1-30-00-13 is a 3 pole - 690 V IEC or 600 UL contactor with screw terminals, controlling motors up to 11 kW / 400 V AC (AC-3) or 15 hp / 480 V UL 45 A (AC-1) or 45 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V, 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

The AF09Z-22-00-30 is a 4-pole - 690 V IEC or 600 UL contactor with screw terminals, controlling motors up to 4 kW / 400 V AC (AC-3) and switching power circuits up to 25 A (AC-1) or 25 A UL general use. Thanks to the AF technology, the contactor has a 24 V DC coil, featuring a reduced holding coil consumption down to 1.7 W and offering the possibility of a direct control by PLC-output ≥ 250 mA 24 V DC, without need of additional interface relay, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

CONTACTOR 115A 240BVAC 1NO1NC

CONTACTOR 115A 120VDCEI 1NO1NC

NON-REVERSING, 3 POLE CONTACTOR

CONTACTEUR

Contacteur, FVNR 140A, 3 pôles, 24VDC Elec. Bobine, 1NO 1NC Aux

Contactor, FVNR 110A, 3-Pole, 24VDC Coil, 2NO 1NC 1LBNC Aux

NON-REVERSING CONTACTOR 3POLE 180A COIL 480VAC 1NO/1NC

NON-REVERSING CONTACTOR 3POLES

3Pole contactor 180A, 1NO/1NC, electronic coil 220VAC

3Pole contactor 180A, 1NO/1NC, electronic coil 24VAC

Contactor, FVNR 180A, 3-Pole, 24VDC Elec. Coil, 1NO 1NC Aux

Contactor, FVNR 180A, 3-Pole, 24VDC Coil, 2NO 1NC 1LBNC Aux

Power Wiring Kit, CA6-95(EI)-180(EI) (use with CA6-HB1/HB2)

Power Wiring Kit, CA6-95(EI)-180(EI) (use with Lugs CA6-105.

Power Wiring Kit, CA6-95(EI)-180(EI) (use with CA6-HB1/HB2)