Moteurs et Variateurs de fréquences

ACQ580 240V 1HPld/0.75HPhd; Nema 12

Câble de commande numérique de 3 m de long

Tension 400 V AC Unité de freinage

Tension 400 V AC Unité de freinage

Tension 400 V AC Unité de freinage

PSTX HMI Accessory kit including RJ45 connector, RJ45 cable, anybus connection cover, HMI gasket and nut and rubber cover for HMI front.

ACS880 600V 3Ph VFD 99A, 100HP Normal Duty 77A, 75HP Heavy Duty R7 Frame Integral Input Choke Integral Modbus RTU NEMA 12 Enclosed

Câble d'alimentation standard de 3 m de long

SYSTEM PROS, DOL MAX.1HP 120VAC

SYSTEM PROS,DOL,1P,17A AC3,TYPE 1

SYSTEM PROS, DOL MAX.5HP 240VAC

SYSTEM PROS,DOL,2P,9A AC3,TYPE 1

DOL PROS STARTER KIT, 3P, 9A, AC3, NEMA 1 120V

Puissance nominale de 0,1 à 1,5 kW et tension d'entrée de 200 V Réacteur à courant alternatif (CA)

SYSTEM PROS

Connection kit for PSR3…PSR16 with MS116 or MS132

The softstarter PSE300-600-70-1 has a rated maximum operational current of 300 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter. It’s a perfect balance be­tween high starting capacity and cost effi­ciency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

"AC Drv,240V 3PH,2HP 1.5KW CT"

Câble haute flexibilité de 15 m de long

Câble haute flexibilité de 20 m de long