Barrières immatérielles de sécurité

711 mm Acier inoxydable Miroir

813 mm Acier inoxydable Miroir

1016 mm Acier inoxydable Miroir

1219 mm Acier inoxydable Miroir

Largeur 100 mm Module Mute

Safety Light Curtain, F3SG-SRA Advanced, Type 4, 25 mm resolution, range 0.3 to 20.0 m, height 880 mm, PNP/NPN

Largeur 22,5 mm Module d'extension de relais

Support de sol léger de 40 po de hauteur

Support de sol léger de 44 po de hauteur

Support de sol léger de 56 po de hauteur

Support de sol léger de 72 po de hauteur

Outil d'alignement laser

0,22 m Longueur du câble

1501 à 2000 mm Longueur du boîtier

1501 à 2000 mm Longueur du boîtier

JSM Orion02 - 4 standard brackets for Orion3. For 500, 800 and 900 mm units, 2 brackets should be used per unit (active or passive unit). For 1200 mm units, 3 brackets should be used per unit (active or passive unit). These are spare parts since the necessary number of bracket are delivered with the light-guard.

Orion1 Mirror 060 - Deviating mirror exclusive stand - for Orion1 - Length = 600 mm - The lenght of the mirror must be at at least 100 mm longer than the protected height of the light curtain

Transfer cable, L=0.2 m, 8 x 0.34 mm2 + shield with straight M12-8 male + female connectors. Shield connected to pin 7 (0 V) on male connector. Can be used when connecting an Orion1 Base in manual reset to Tina 10B or M12-3R.

Transfer cable, L=0.2 m, 8 x 0.34 mm2 + shield with straight M12-8 male + female connectors. Shield connected to pin 7 (0 V) on male connector. Can be used when connecting an Orion3 Base to Tina 10A/B/C or M12-3R.

M12 Y-connector for connection of a reset light button to Orion1 Base (M12-CTO1BM necessary), Orion 2 Base/Extended, Orion3 Base (M12-CTO3B necessary) and Orion3 Extended. One M12-8 female connector (#2) for connecting Orion, one M12-5 male connector (#1) for connecting +24 VDC, 0 V and the OSSD signals and one M12-5 female connector (#3) for connecting a reset light button like Smile.