Barrières immatérielles de sécurité
JSM Orion02 - 4 standard brackets for Orion3. For 500, 800 and 900 mm units, 2 brackets should be used per unit (active or passive unit). For 1200 mm units, 3 brackets should be used per unit (active or passive unit). These are spare parts since the necessary number of bracket are delivered with the light-guard.
Pas en stock
Orion1 Mirror 060 - Deviating mirror exclusive stand - for Orion1 - Length = 600 mm - The lenght of the mirror must be at at least 100 mm longer than the protected height of the light curtain
Pas en stock
Transfer cable, L=0.2 m, 8 x 0.34 mm2 + shield with straight M12-8 male + female connectors. Shield connected to pin 7 (0 V) on male connector. Can be used when connecting an Orion1 Base in manual reset to Tina 10B or M12-3R.
Pas en stock
Transfer cable, L=0.2 m, 8 x 0.34 mm2 + shield with straight M12-8 male + female connectors. Shield connected to pin 7 (0 V) on male connector. Can be used when connecting an Orion3 Base to Tina 10A/B/C or M12-3R.
Pas en stock
M12 Y-connector for connection of a reset light button to Orion1 Base (M12-CTO1BM necessary), Orion 2 Base/Extended, Orion3 Base (M12-CTO3B necessary) and Orion3 Extended. One M12-8 female connector (#2) for connecting Orion, one M12-5 male connector (#1) for connecting +24 VDC, 0 V and the OSSD signals and one M12-5 female connector (#3) for connecting a reset light button like Smile.
Pas en stock
Paire de barrières immatérielles de sécurité TX + RX, hauteur de protection 440mm/17", résolution 25mm
Safety Light Curtain, F3SG-SRA Advanced, Type 4, 25 mm resolution, range 0.3 to 20.0 m, height 720 mm, PNP/NPN
Safety Light Curtain, F3SG-SRA Advanced, Type 4, 14 mm resolution, range 0.3 to 10.0 m, height 240 mm, PNP/NPN
Safety Light Curtain, F3SG-SRA Advanced, Type 4, 25 mm resolution, range 0.3 to 20.0 m, height 880 mm, PNP/NPN



















