Câbles et Connecteurs de Sécurité Machine

C5 cable 200m is a shielded cable without any connector. The five conductors have a cross section of 0.34 mm2. The jacket is made of black PVC. The length of the cable is 200 meters delivered on a spool.

C5 cable 500m is a shielded cable without any connector. The five conductors have a cross section of 0.34 mm2. The jacket is made of black PVC. The length of the cable is 500 meters delivered on a spool.

M12-3H is a M12 Y-connector for series connection of Adam OSSD M12-8 safety sensor with M12-5 cables. Connector #2 is a M12-8 female connector for connection of the safety sensor, connector #1 is a M12-5 male connector for connecting +24VDC, 0V and the incoming OSSD signals, and connector #3 is a M12-5 female connector for continuation of the circuit towards another safety device or the safety control device.

M12-C31 is a shielded cable with a straight M12-5 female connector and a free end. The five conductors have a cross section of 0.34 mm2. The jacket is made of black PVC. The length of the cable is 3 meters.

M12-C00634 is a shielded cable with straight M12-8 male and female connectors. The eight conductors have a cross section of 0.34 mm2. The shield is connected to pin 7 (0V) on the male connector. The jacket is made of black PVC. The length of the cable is 0.06 meter.

M12-C1012V2 is a shielded cable with a straight M12-5 male and a right-angled M12-5 female connectors. The five conductors have a cross section of 0.34 mm2. The jacket is made of black PVC. The length of the cable is 10 meters.

M12-C61 V 6 m de câble 5 × 0,34 mm2 + écran avec connecteur M12 femelle coudé.

JSHK0 is a 12 pole female Cannon connector for cable mounting.

JSHK1-C is a 12 pole male Cannon connector for cabinet mounting.

JSHK1-A is a 12 pole female Cannon connector for cabinet mounting.

JSHK1-B is a 12 pole male Cannon connector for cable mounting.

HK40S4 is a spiral cable with a straight Cannon female connector and free end. 12 conductors with a section of 0.25 mm2 each. Jacket in black PUR. The length extended is 4 meters.

HK60S4 is a spiral cable with a straight Cannon female connector and free end. 12 conductors with a section of 0.25 mm2 each. Jacket in black PUR. The length extended is 6 meters.

HK5 is a cable with a straight Cannon female connector and free end. 12 conductors with a section of 0.25 mm2 each. Jacket in black PVC. Length is 5 meters.

The JSHD4-2-AK is an ergonomic three-position device which top part has LEDs, a front button and a top button, and which bottom part is equipped with a Cannon connector. This model is mainly intended for replacement of older non modular JSHD4 enabling device (Jokab brand). Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

HK16S4 is a spiral cable with a straight Cannon female connector and free end. 12 conductors with a section of 0.25 mm2 each. Jacket in black PUR. The length extended is 1.6 meters.

HK20S4 is a spiral cable with a straight Cannon female connector and free end. 12 conductors with a section of 0.25 mm2 each. Jacket in black PUR. The length extended is 2 meters.

HK32S4 is a spiral cable with a straight Cannon female connector and free end. 12 conductors with a section of 0.25 mm2 each. Jacket in black PUR. The length extended is 3.2 meters.

HK80S4 is a spiral cable with a straight Cannon female connector and free end. 12 conductors with a section of 0.25 mm2 each. Jacket in black PUR. The length extended is 8 meters.

M12-3B is a M12 Y-connector for parallel connection of 2 DYNlink devices such as Eden sensors, and Tina adapters. Connectors #2 and #3 are M12-5 female connectors for connection of the DYNlink safety devices and connector #1 is a M12-5 male connector for connection to the DYNlink loop.