JSTD1-C

JSTD1-B is a Safeball with two contacts, 1NO and 1NC, and 4 wires, 0.2m, for direct connection into an enclosure. Its ergonomic design provides several grip possibilities, a low activation force of approximately 2N, and flexible mounting possibilities. This model allows a maximum load of 30VDC, 2A resistive. It offers an IP67 protection degree. Its body is made of polypropylene.Safeball is an ergonomic control device consisting of a spherical ball containing two pushbuttons, one on each side of the ball. Both buttons must be pressed in order to start and operate the machine. The risk of unintentional activation is thereby minimized Usually two Safeball are used together to form a two-hand control, and the operator must press all four push buttons simultaneously in order to operate the machine. If one or more of the buttons are released, a stop signal is given to the machine.

JSTD1-A is a Safeball with two contacts, 1NO and 1NC, and a 2 m long cable (4 conductors). Its ergonomic design provides several grip possibilities, a low activation force of approximately 2N, and flexible mounting possibilities. This model allows a maximum load of 30VDC, 2A resistive. It offers an IP67 protection degree. Its body is made of polypropylene.Safeball is an ergonomic control device consisting of a spherical ball containing two pushbuttons, one on each side of the ball. Both buttons must be pressed in order to start and operate the machine. The risk of unintentional activation is thereby minimized Usually two Safeball are used together to form a two-hand control, and the operator must press all four push buttons simultaneously in order to operate the machine. If one or more of the buttons are released, a stop signal is given to the machine.

JSTD1-E is a Safeball with two contacts, 2 NO, and 4 wires, 0.2m, for direct connection into an enclosure. Its ergonomic design provides several grip possibilities, a low activation force of approximately 2N, and flexible mounting possibilities. This model allows a maximum load of 30VDC, 2A resistive. It offers an IP67 protection degree. Its body is made of polypropylene.Safeball is an ergonomic control device consisting of a spherical ball containing two pushbuttons, one on each side of the ball. Both buttons must be pressed in order to start and operate the machine. The risk of unintentional activation is thereby minimized Usually two Safeball are used together to form a two-hand control, and the operator must press all four push buttons simultaneously in order to operate the machine. If one or more of the buttons are released, a stop signal is given to the machine.

Anneau de distance pour le support de sol JSTS30.

JSTD20B Appareil bimanuel avec boutons de commande conventionnels et bouton d'arrêt d'urgence

JSTS31 Support de sol avec anneau de distance Support de sol pour les appareils bimanuels JSTD20/25. Acier peint en noir avec levier de réglage de la hauteur et anneau de distance.

JSTD20A Dispositif bimanuel avec boutons de commande conventionnels. Boutons de commande de 60 mm de diamètre, noirs, force de manœuvre de 9N, 1 contact NO + 1 contact NF, 10A

JSTS30 Support de sol Support de sol pour les appareils à deux mains JSTD20/25. Acier peint en noir avec levier de réglage de la hauteur.

Protective plates for Safeball (kit) including fasteners.

Safeball Coat is an extra protection for the Safeball JSTD1. It is made of silicone.

JSTD25P-1 Dispositif bimanuel avec boules de sécurité JSTD1-B. Les boules de sécurité ont chacune des interrupteurs indépendants 1NO et 1NC, charge maximale de 30VDC - 2A résistif.

JSTK0-A Connector

JSTK25S Cable

JSTK50S Cable

JSTD25K is a two-hand device with two JSTD1-B Safeball and one emergency stop button Smile 10 EK. The Safeball are mounted on each end of a 44x88 aluminum profile designed for two-hand applications. The emergency stop button is mounted on top. All are pre-wired to a M12-8 male connector. The Safeball are protected by flanges.The JSTD25 control stations are pre-built two-hand devices offering the good ergonomics of Safeball. They can be used as fixed devices that are easy to install, or as mobile devices. All models are equipped with flanges to protect the Safeball from accidental operation, and from damage if the device is dropped on the floor when used as mobile device.

JSM C5 is used for mounting the Safeball JSTD1 on enclosures, machines or table tops. A ball and a socket allow for a flexible mounting.

JSM C14 Holder

The JSHD4-2 is a top part of a three-position device JSHD4. It has LEDs, a front button and a top button. It must be used with one of the following bottom parts: AB, AD, AH, AJ, AK, AL. Anti-tamper can be chosen as option with all except bottom part AK. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

The JSHD4-2 Black is a black top part of a three-position device JSHD4. It has LEDs, a front button and a top button. It must be used with one of the following bottom parts: AB, AD, AH, AJ, AK, AL. Anti-tamper can be chosen as option with all except bottom part AK. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

The JSHD4-3 is a top part of a three-position device JSHD4. It has no LEDs and no extra buttons. It must be used with one of the following bottom parts: AB, AD, AH, AJ, AK, AL. Anti-tamper can be chosen as option with all except bottom part AK. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.