Distributeur OfficielBy ABB
SKU
MPN
1SAM201903R1202
Weight
0.041 kg
Signaling contacts SK1-K with Push-in spring terminals signal the tripping of the manual motor starter. For SK1 the indication on the device itself is done with a protruding orange button. The contact positions of SK1 need to be manually reset after a tripping event by pushing the orange button. SK1-K signaling contacts signal tripping regardless if it was caused by short-circuit, overload or electrical release (AA1 or UA1). They are attached on the right side of the manual motor starter. Signaling contacts SK1-K are available as normally open or normally closed contacts.
Spécifications techniques
Dimensions
| Produit Largeur Net | 9 mm |
| Produit Hauteur Net | 90 mm |
| Produit Longueur Net | 78,5 mm |
| Poids net | 0,035 kg |
Technique
| Type de borne | Push-in Spring Terminals |
| Tension | 690 V AC, 600 V DC, Circuit principal 690 V |
| Courant assignée d’emploi AC-15 (Ie) | (24 V) 6 A, (240 V) 4 A, (690 V) 1 A, (380 / 400 V) 3 A |
| Courant assignée d’emploi DC-13 (Ie) | (24 V) 2 A, (125 V) 0.55 A, (250 V) 0.27 A, (440 V) 0.15 A, (600 V) 0.15 A |
| Tension assignée de tenue aux chocs (Uimp) | Circuit auxiliaire 6 kV |
| Tension assignée d’isolement (Ui) | 690 V |
| Indice de protection | IP20 |
| Electrical Durability | 100000 cycle |
| Durabilite mecanique | 100000 cycle |
| Connecting Capacity Auxiliary Circuit | Flexible with Ferrule 1/2x 0.5 ... 2.5 mm², Flexible with Insulated Ferrule 1/2x 0.5 ... 1.5 mm², Flexible 1/2x 0.5 ... 2.5 mm², Rigid 1/2x 0.5 ... 2.5 mm² |
| Wire Stripping Length | Auxiliary Circuit 10 mm |
| Recommended Screw Driver | M3 |
| Number of Auxiliary Contacts NO | 2 |
| Number of Auxiliary Contacts NC | 0 |
| Normes et standards | CSA 22.2 No. 14, IEC/EN 60947-1, IEC/EN 60947-5-1, UL 508, UL 60947-1, UL 60947-4-1 |
| Type de produit | Signaling Contact |
| Adapté pour | MS116, MS132, MO132, MS165, MO165 |
| Adapté pour la classe de produit | Manual Motor Starter |
| Groupe d'accessoires | Electrical |
| Type d'accessoire | Contact de signalisation |
Technique UL/CSA
| Maximum Operating Voltage UL/CSA | Circuit principal 600 V AC |
| Connecting Capacity Auxiliary Circuit UL/CSA | Rigid 1/2x 20-14 AWG, Stranded 1/2x 20-14 AWG |
| Contact Rating UL/CSA | B600, Q600 |
Environnement
| Température de l’air ambiant | Operation -25 ... +60 °C, Storage -50 ... +80 °C |
| Résistance aux chocs selon CEI 60068-2-27 | 11 ms Pulse 25g |
| Resistance to Vibrations acc. to IEC 60068-2-6 | 5g / 3 ... 150 Hz |
| Statut RoHS | Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019 |
Pourquoi Proax pour ABB SK1-20K?
Proax est un distributeur autorisé de ABB SK1-20K et l'un des plus grands distributeurs de ABB en Amérique du Nord. Notre équipe technique interne, qui est hautement qualifiée, est prête à répondre à vos besoins techniques!
Avez-vous une question? pour vous aider à obtenir le bon produit le plus rapidement possible pour votre projet. Nous sommes toujours là pour vous aider!
Délai de livraison court
Personnel qualifié
Chat en direct
Support technique
Inventaire local
60+ ans d'expérience
Informations complémentaires
| Autres noms | SK120K |
| Taille de l'emballage | 1 |
Recommandé
Signaling contacts SK1-AR with screw terminals signal the tripping of the manual motor starter.For SK1-AR a red flag in a window on the front of the device indicates the tripping event. The contact positions of SK1-AR don't need to be manually reset after a tripping. They are reset to their original position when the manual motor starter is switched back on. The SK1-AR signaling contacts signal tripping regardless if it was caused by short-circuit, overload or electrical release (AA1 or UA1). They are attached on the right side of the manual motor starter. Signaling contacts SK1-AR are available as normally open or normally closed contacts.
Signaling contacts SK1-ARK with Push-in spring terminals signal the tripping of the manual motor starter. For SK1-ARK a red flag in a window on the front of the device indicates the tripping event. The contact positions of SK1-AR don't need to be manually reset after a tripping. They are reset to their original position when the manual motor starter is switched back on. The SK1-ARK signaling contacts signal tripping regardless if it was caused by short-circuit, overload or electrical release (AA1 or UA1). They are attached on the right side of the manual motor starter. Signaling contacts SK1-ARK are available as normally open or normally closed contacts.
Signaling contacts SK1-K with Push-in spring terminals signal the tripping of the manual motor starter. For SK1 the indication on the device itself is done with a protruding orange button. The contact positions of SK1 need to be manually reset after a tripping event by pushing the orange button. SK1-K signaling contacts signal tripping regardless if it was caused by short-circuit, overload or electrical release (AA1 or UA1). They are attached on the right side of the manual motor starter. Signaling contacts SK1-K are available as normally open or normally closed contacts.