Portes et serrures d'enceinte

SV Porte partielle, WH : 400x1000 mm, pour TS

SV Porte partielle, WH : 400x150 mm, pour TS

SV Porte partielle, WH : 400x200 mm, pour TS

SV Porte partielle, WH : 400x300 mm, pour TS

SV Porte partielle, WH : 400x400 mm, pour TS

SV Porte partielle, WH : 400x2000 mm, pour TS

SV Porte partielle, WH : 400x1600 mm, pour TS

SV Porte partielle, WH : 400x1800 mm, pour TS

SV Porte partielle, WH : 600x800 mm, pour TS, avec fenêtre de visualisation

SV Porte partielle, WH : 600x2000 mm, pour TS

SV Porte partielle, WH : 800x150 mm, pour TS

SV Porte partielle, WH : 800x200 mm, pour TS

SV Porte partielle, WH : 800x1800 mm, pour TS

SV Panneau de finition avant, pour TS, en haut, WH : 800x300 mm, type de protection IP 54

SV Panneau de finition avant, pour TS, en bas, WH : 800x300 mm, type de protection IP 54

CS Semi-cylindre pour inserts de serrure, selon DIN 18 252, Verrouillage simultané dans le même paquet

9672167, Suitable for TS enclosures instead of a door or rear panel. The partial doors can be combined as required. A front trim panel is required at the top and bottom. Door may be optionally hinged on the right or left. In doors without a viewing window (height 600 – 1000 mm), installation of the monitor frame SZ 2305.000 is possible. Standard double-bit lock insert may be exchanged for lock inserts, type F, and for comfort handle in systems 600 mm or more high.

The Deep-Hinged Window Kit (WKDH) is used as a viewing window where access to components mounted behind the window is required. It is designed to protect HMI displays and components mounted on enclosure panels from wash-down, rain, snow, sleet, dirt and dust. WKDH fits on the usable area of Rittal’s standard wall-mount, free-standing TS8/SE8 and other enclosure panels. Window depth allows for use of extra deep pushbuttons (~2”/50mm). It comes with a full-size drill template for easy mounting.

2200H0600D TS8 DISCONNECT MODULE SS 316

The Deep-Hinged Window Kit (WKDH) is used as a viewing window where access to components mounted behind the window is required. It is designed to protect HMI displays and components mounted on enclosure panels from wash-down, rain, snow, sleet, dirt and dust. WKDH fits on the usable area of Rittal’s standard wall-mount, free-standing TS8/SE8 and other enclosure panels. Window depth allows for use of extra deep pushbuttons (~2”/50mm). It comes with a full-size drill template for easy mounting.