Marques populaires dans { name }

Achetez { name } chez Proax, distributeur d'automatisation top au Canada. Ramassage facile, expédition rapide.

Magasinez { name } en ligne

- Vous avez peut-être tapé le mauvais terme de recherche, par exemple un nom de produit mal orthographié ou des caractères/symboles spéciaux.
- Il se peut que nous n'ayons pas le produit que vous recherchez

Essayez d'affiner votre recherche en n'utilisant pas de caractères spéciaux.

**Ce n'est pas le cas ? N'hésitez pas à nous contacter et nous vous aiderons le plus rapidement possible.**

Recherche

Advantech

Serial transmission speed

50 ~ 921.6 kbps, any baud rate setting

BB-485HESP

BB-485USBTB2WLS-A

USB TO SERIAL 1PT 485, 2W, TB - LOCKED SERIAL #

DB-37 Wiring Terminal, DIN-rail Mount<h4>Features</h4><ul><li>Low cost universal DIN-rail mounting screw terminal module for DAQ cards with DB37 female connector</li><li>Case dimensions (W x L x H): 87.2 x 112.5 x 51 mm (3.4" x 4.4" x 2.0")</li></ul>

ADAM-3937-BE

CIRCUIT MODULE, DB-37 Wiring Terminal, DIN-rail Mount

EKI-1242IEIMS-A

Modbus RTU/TCP to EtherNet/IP Fieldbus Gateway

A premium, heavy industrial RS-422/485 isolated repeater. Powerful isolation on both data ports protects equipment and data from ground loops and surges. It extends full or half-duplex RS-422/485 signals an additional 4000 feet and allows 32 additional nodes to your network. 10-48 VDC input power.<h4>Features</h4><ul><li>RS-422/485 Repeator</li><li>2kV, 3-way isolation (input/output/power)</li><li>Data rates:1.2 to 115.2 Kbps</li><li>Wide operating temperature range: -40 to +85 °C</li><li>IEC-61850-3,  IEEE-1613, NEMA TS2, FCC, CE</li><li>10 to 48 VDC input power (power supply required, sold separately)</li></ul>

BB-485OPDRI-PH

RS-422/485 Isolated extender, Heavy Industrial

Our premium heavy industrial RS-232 to RS-422/485 isolated converter. Powerful isolation on both data ports protects equipment and data from damaging ground loops and surges. Additional isolation on the power supply circuits adds a third degree of protection. An external power supply is required.<h4>Features</h4><ul><li>Converts RS-232 data signals to RS-422/RS-485</li><li>Three-way 2 KV optical isolation (input, output, power)</li><li>Wide operating temperature: -40 to +85 °C</li><li>Modbus ASCII/RTU</li><li>Rugged IP30 metal panel mount case, DB9 F / TB</li><li>10-48 Vdc input power (external power supply required, sold separately)</li><li>UL C1/D2, IEEE-61850-3, IEEE-1613</li></ul>

BB-485DRCI-PH

RS-232 to RS-422/485 Converter, Heavy Industrial

ADAM-4510I-AE

BB-422PP9R

ADAM-3951-BE

ADAM-3952-AE

ADAM-3955-AE

ADAM-3956-BE

ANT-LTE5G-025

EKI-1222-CE

BB-232NM9FF6

DB9 FEMALE TO DB9 FEMALE 6FT (NULL MODEM)

The EKI-1200 series Modbus gateways are bi-directional gateways for integrating new and existing Modbus/RTU and Modbus/ASCII serial devices to newer TCP/IP networked-based devices. The EKI-1221/1222/1224 feature two independent Ethernet ports and MAC addresses.<h4>Features</h4><ul><li>Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy</li><li>Integration of Modbus TCP and Modbus RTU/ASCII networks</li><li>Supports up to 921.6 kbps, and any baud rate setting</li><li>support up to 16 connections on each serial port under Modbus Client mode and 32 sessions under Modbus Server mode.</li><li>Software selectable RS-232/422/485 communication</li><li>Mounts on DIN-rail and Wall mount</li><li>Supports surge protection for D.C. power ports with line to line 2 KV, and line to earth 4 KV; for signal ports with 4 KV.</li><li>Built-in 15 KV ESD protection for all serial signals</li><li>Automatic RS-485 data flow control</li></ul>

EKI-1221I-CE

4-channel conversion between 3.3 Vdc TTL/CMOS and RS232. TD, RD, RTS, CTS support. Powered by pin/signals 7(RTS), 4 (DTR), 3(TD); lines can be high or low, but must be present to power the converter. Pin 5 is SG for both connectors. Use with microcontrollers or PLCs supporting TTL.<h4>Features</h4><ul><li>Converts 2 channels in each direction from RS-232 to 3.3 V TTL/CMOS</li><li>Data rate: up to 115.2 kbps baud</li><li>Powered from RS-232 data/handshake lines (high or low) - no power supply needed</li><li>RS-232 DB9 female connector; TTL/CMOS DB9 male connector</li></ul>

BB-232LPTTL33

RS232 TO 3.3V TTL CONVERTER 9 PIN PORT POWERED

Supports 2-wire USB to RS-485 or 4-wire RS-422/485. Long range, multi-drop communications. Easy to set up with plug in terminal block on RS-422/485 side and a high retention USB connector that works with a standard USB cable (included). LEDs indicate Transmit and Receive. USB Port Powered.<h4>Features</h4><ul><li>USB to RS-422/485 Converter</li><li>2 kV Isolation</li><li>USB Port Powered</li><li>High Retention USB Connector, Plug in Serial Terminal Block</li><li>460.8 kbps Serial Data Rate</li><li>USB Cable Included</li></ul>

BB-USOPTL4

CIRCUIT MODULE, High Retention USB to RS-422/485 Iso. Converter

A high speed, optically isolated RS-422/485 repeater that supports data rates up to 1.5 Mbps. Provides 2kV digital isolation with 8 kV air ESD protection and 600 W transient voltage suppression on data lines. Can extend range up to 1.2 km. 2-wire RS-485, 4-wire RS-485 and RS-422 are supported.<h4>Features</h4><ul><li>Extends RS-422/RS-485 an extra 1.2 km (4000 ft)</li><li>2 kV Isolation, and IEC ESD protections</li><li>Data rate: up to 1.5 Mbps</li><li>-40 to +80°C wide operating temperature</li><li>DIN rail mount (panel mount with optional brackets)</li><li>10 - 30 Vdc power supply required, not included, sold separately</li></ul>

BB-485OPDR-HS

Four serial ports, 2-wire RS-485 or 4-wire USB to RS-422/485. Long range, multi-drop communications. Easy to set up with plug in terminal blocks on RS-422/485 side and a high retention USB connector that works with a standard USB cable. LEDs indicate transmit and receive. 10-30 VDC power input.<h4>Features</h4><ul><li>USB to RS-422/485 Converter</li><li>2 kV Isolation</li><li>921.6 Kbps Serial Data Rate</li><li>Flat Panel Mounting </li><li>Terminal Block for 10-30 VDC Power Input </li><li>High Retention USB Connector, Plug in Serial Terminal Block</li><li>USB Cable Included</li></ul>

Advantech Communication industrielle