<p>Les blocs de jonction pour circuits imprimés et les connecteurs de Phoenix Contact assurent des connexions électriques sûres et fiables avec des performances robustes et une installation facile, idéales pour optimiser les projets et les systèmes électroniques.</p>


Achetez { name } chez Proax, distributeur d'automatisation top au Canada. Ramassage facile, expédition rapide.

Magasinez { name } en ligne

- Vous avez peut-être tapé le mauvais terme de recherche, par exemple un nom de produit mal orthographié ou des caractères/symboles spéciaux.
- Il se peut que nous n'ayons pas le produit que vous recherchez

Essayez d'affiner votre recherche en n'utilisant pas de caractères spéciaux.

**Ce n'est pas le cas ? N'hésitez pas à nous contacter et nous vous aiderons le plus rapidement possible.**

<h3>PLC-RSC- 24DC/21 - Relay module</h3><p>PLC-INTERFACE, consisting of basic terminal block PLC-BSC.../21 with screw connection and plug-in miniature relay with power contact, for assembly on DIN rail NS 35/7,5, 1 changeover contact, input voltage 24 V DC</p><ul><li>Slim design</li><li>Efficient connection to system cabling using V8 adapter</li><li>RT III sealed relay</li><li>Safe isolation between coil and contact side</li><li>Functional plug-in bridges</li><li>Integrated input circuit and interference suppression circuit</li></ul>

2966171

PLC-INTERFACE, consisting of basic terminal block PLC-BSC.../21 with screw connection and plug-in miniature relay with power contact, for assembly on DIN rail NS 35/7,5, 1 changeover contact, input voltage 24 V DC

<h3>FL SWITCH 1005N - Industrial Ethernet Switch</h3><p>Narrow Ethernet switch, five RJ45 ports with 10/100 Mbps on all ports, automatic data transmission speed detection, autocrossing function, and QoS</p><ul><li>RJ45 ports support a transmission speed of 10/100 Mbps</li><li>QoS-prioritized (Quality of Service) messages</li><li>Local diagnostic indicators with LEDs</li><li>Enhanced traffic prioritization for automation protocols</li><li>PROFINET PTCP filter for reliable communication on PROFINET networks</li><li>Energy-efficient Ethernet in accord. with IEEE 802.3az</li><li>PROFINET Conformance Class A for real-time data exchange</li><li>Auto negotiation and autocrossing detection simplifies installation and setup</li></ul>

1085039

Industrial Ethernet Switch - FL SWITCH 1005N

<h3>PLC-RPT- 24DC/21 - Relay Module</h3><p>PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with Push-in connection and plug-in miniature relay with power contact, for mounting on NS 35/7,5 DIN rail, 1 changeover contact, input voltage 24 V DC</p><ul><li>Slim design</li><li>Efficient connection to system cabling using V8 adapter</li><li>RT III sealed relay</li><li>Safe isolation between coil and contact side</li><li>Functional plug-in bridges</li><li>Integrated input circuit and interference suppression circuit</li></ul>

2900299

<h3>FL SWITCH 1008N - Industrial Ethernet Switch</h3><p>Narrow Ethernet switch, eight RJ45 ports with 10/100 Mbps on all ports, automatic data transmission speed detection, autocrossing function, and QoS</p><ul><li>RJ45 ports support a transmission speed of 10/100 Mbps</li><li>QoS-prioritized (Quality of Service) messages</li><li>Local diagnostic indicators with LEDs</li><li>PROFINET PTCP filter for reliable communication on PROFINET networks</li><li>Enhanced traffic prioritization for automation protocols</li><li>Energy-efficient Ethernet in accord. with IEEE 802.3az</li><li>PROFINET Conformance Class A for real-time data exchange</li><li>Auto negotiation and autocrossing detection simplifies installation and setup</li></ul>

1085256

Industrial Ethernet Switch - FL SWITCH 1008N

<h3>CLIPFIX 35-5 - End bracket</h3><p>Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray</p><ul><li>Large-surface marking</li><li>Design width of just 5.2 mm</li><li>Phoenix Contact has engineered its CLIPFIX end brackets to maintain a secure grip on the various DIN rail systems</li></ul>

3022276

CLIPFIX 35-5 - Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray

<h3>PT 2,5 - Feed-through terminal block</h3><p>Feed-through terminal block, nom. voltage: 800 V, nominal current: 24 A, number of connections: 2, number of positions: 1, connection method: Push-in connection, Rated cross section: 2.5 mm2, cross section: 0.14 mm2 - 4 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray</p><ul><li>The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free wiring of conductors with ferrules or solid conductors</li><li>The compact design and front connection enable wiring in a confined space</li><li>In addition to the testing option in the double function shaft, all terminal blocks provide an additional test pick-off</li><li>Tested for railway applications</li></ul>

3209510

PT 2,5 - Feed-through terminal block, nom. voltage: 800 V, nominal current: 24 A, number of connections: 2, number of positions: 1, connection method: Push-in connection, Rated cross section: 2.5 mm2, cross section: 0.14 mm2 - 4 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray

<h3>UT 4 - Feed-through terminal block</h3><p>Feed-through terminal block, nom. voltage: 1000 V, nominal current: 32 A, number of connections: 2, connection method: Screw connection, Rated cross section: 4 mm2, cross section: 0.14 mm2 - 6 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray</p><ul><li>The large wiring space enables the connection of solid and stranded conductors without ferrules, even above the nominal cross section</li><li>As well as saving space, the compact design enables user-friendly wiring in a small amount of space</li><li>Optimum screwdriver guidance through closed screw shafts</li><li>The cable entry funnel enables the use of conductors with ferrules and plastic collars within the nominal cross section</li><li>Tested for railway applications</li></ul>

3044102

UT 4 - Feed-through terminal block, nom. voltage: 1000 V, nominal current: 32 A, number of connections: 2, connection method: Screw connection, Rated cross section: 4 mm2, cross section: 0.14 mm2 - 6 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray

<h3>E/NS 35 N - End bracket</h3><p>End clamp, width: 9.5 mm, color: gray</p><ul><li>Large-surface marking</li></ul>

0800886

E/NS 35 N - End clamp, width: 9.5 mm, color: gray

<h3>NS 35/ 7,5 PERF 2000MM - DIN rail perforated</h3><p>DIN rail perforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver</p>

0801733

NS 35/ 7,5 PERF 2000MM - DIN rail perforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver

<h3>PTTB 2,5 - Double-level terminal block</h3><p>Double-level terminal block, nom. voltage: 500 V, nominal current: 22 A, connection method: Push-in connection, 1st and 2nd level, Rated cross section: 2.5 mm2, cross section: 0.14 mm2 - 4 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray</p><ul><li>The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free wiring of conductors with ferrules or solid conductors</li><li>The compact design and front connection enable wiring in a confined space</li><li>In addition to the testing option in the double function shaft, all terminal blocks provide an additional test pick-off</li><li>Tested for railway applications</li></ul>

3210567

<h3>FBS 10-5 - Plug-in bridge</h3><p>Plug-in bridge, pitch: 5.2 mm, number of positions: 10, length: 23 mm, color: red</p><ul><li>The 2- to 50-pos. jumpers can bridge up to 50 terminal blocks in the two bridge shafts of the CLIPLINE complete system in one step</li></ul>

3030213

FBS 10-5 - Plug-in bridge, pitch: 5.2 mm, number of positions: 10, length: 23 mm, color: red

<h3>CLIPFIX 35 - End bracket</h3><p>Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray</p><ul><li>Design width of just 9.5 mm</li><li>Large-surface marking</li><li>Phoenix Contact has engineered its CLIPFIX end brackets to maintain a secure grip on the various DIN rail systems</li></ul>

3022218

CLIPFIX 35 - Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray

<h3>PT 2,5-QUATTRO - Feed-through terminal block</h3><p>Feed-through terminal block, nom. voltage: 800 V, nominal current: 24 A, number of connections: 4, connection method: Push-in connection, Rated cross section: 2.5 mm2, cross section: 0.14 mm2 - 4 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray</p><ul><li>In addition to the testing option in the double function shaft, all terminal blocks provide an additional test pick-off</li><li>The compact design and front connection enable wiring in a confined space</li><li>The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free wiring of conductors with ferrules or solid conductors</li><li>Tested for railway applications</li></ul>

3209578

Feed-through terminal block - PT 2,5-QUATTRO

<h3>FL SWITCH 1016N - Industrial Ethernet Switch</h3><p>Narrow Ethernet switch, sixteen RJ45 ports with 10/100 Mbps on all ports, automatic data transmission speed detection, autocrossing function, and QoS</p><ul><li>QoS-prioritized (Quality of Service) messages</li><li>RJ45 ports support a transmission speed of 10/100 Mbps</li><li>Local diagnostic indicators with LEDs</li><li>PROFINET PTCP filter for reliable communication on PROFINET networks</li><li>Enhanced traffic prioritization for automation protocols</li><li>Energy-efficient Ethernet in accord. with IEEE 802.3az</li><li>PROFINET Conformance Class A for real-time data exchange</li><li>Auto negotiation and autocrossing detection simplifies installation and setup</li></ul>

1085255

Industrial Ethernet Switch - FL SWITCH 1016N

<h3>SAC-4P- 5,0-PUR/M12FS - Sensor/actuator cable</h3><p>Sensor/actuator cable, 4-position, PUR halogen-free, black-gray RAL 7021, free cable end, on Socket straight M12, coding: A, cable length: 5 m</p><ul><li>Easy and safe: 100 % electrically tested plug-in components</li></ul>

1668124

Sensor/actuator cable - SAC-4P- 5,0-PUR/M12FS

<h3>PTTBS 2,5 - Double-level terminal block</h3><p>Double-level terminal block, nom. voltage: 500 V, nominal current: 22 A, connection method: Push-in connection, 1st and 2nd level, Rated cross section: 2.5 mm2, cross section: 0.14 mm2 - 4 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray</p><ul><li>In addition to the testing option in the double function shaft, all terminal blocks provide an additional test pick-off</li><li>The compact design and front connection enable wiring in a confined space</li><li>The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free wiring of conductors with ferrules or solid conductors</li></ul>

3209604

PTTBS 2,5 - Double-level terminal block, nom. voltage: 500 V, nominal current: 22 A, connection method: Push-in connection, 1st and 2nd level, Rated cross section: 2.5 mm2, cross section: 0.14 mm2 - 4 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray

<h3>FL MGUARD RS2000 TX/TX VPN - Router</h3><p>Remote maintenance router, 10/100 Mbps, NAT, VPN, firewall</p><ul><li>Central management tool</li><li>Maximum performance</li><li>Maximum security</li></ul>

2700642

<h3>PT 2,5-3L - Multi-level terminal block</h3><p>Multi-level terminal block, nom. voltage: 500 V, nominal current: 20 A, connection method: Push-in connection, 1st, 2nd and 3rd level, Rated cross section: 2.5 mm2, cross section: 0.14 mm2 - 4 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray</p><ul><li>In addition to the testing option in the double function shaft, all terminal blocks provide an additional test pick-off</li><li>The compact design and front connection enable wiring in a confined space</li><li>The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free wiring of conductors with ferrules or solid conductors</li><li>Tested for railway applications</li></ul>

3210499

<h3>PT 2,5-PE - Ground terminal</h3><p>Ground terminal, number of connections: 2, connection method: Push-in connection, cross section: 0.14 mm2 - 4 mm2, mounting type: NS 35/7,5, NS 35/15, color: green-yellow</p><ul><li>The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free wiring of conductors with ferrules or solid conductors</li><li>The compact design and front connection enable wiring in a confined space</li><li>In addition to the testing option in the double function shaft, all terminal blocks provide an additional test pick-off</li><li>Tested for railway applications</li></ul>

3209536

PT 2,5-PE - Ground terminal, number of connections: 2, connection method: Push-in connection, cross section: 0.14 mm2 - 4 mm2, mounting type: NS 35/7,5, NS 35/15, color: green-yellow

<h3>UCT-TM 5 - Marker for terminal blocks</h3><p></p><ul><li>The UCT-TM... UniCard labeling range includes markers for Phoenix Contact products with tall marker grooves, e.g. terminals</li><li>The markers, which are supplied in uniform sheets, can be marked quickly, easily, and precisely using the card printers</li><li>The sheets provide additional space for project information and function text that can be helpful during further assembly</li><li>The multi-section marking strips are easy to fit and can be easily separated if required</li><li>Marking service: Phoenix Contact can custom-mark all UniCard markers according to your specifications</li></ul>

0828734

<h3>UCT-TM 6 - Marker for terminal blocks</h3><p></p><ul><li>The UCT-TM... UniCard labeling range includes markers for Phoenix Contact products with tall marker grooves, e.g. terminals</li><li>The markers, which are supplied in uniform sheets, can be marked quickly, easily, and precisely using the card printers</li><li>The sheets provide additional space for project information and function text that can be helpful during further assembly</li><li>The multi-section marking strips are easy to fit and can be easily separated if required</li><li>Marking service: Phoenix Contact can custom-mark all UniCard markers according to your specifications</li></ul>

0828736

<h3>SACC-M12MS-4CON-PG 7-M - Connector</h3><p>Connector, Universal, 4-position, Plug straight M12, coding: A, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg7, external cable diameter 4 mm ... 6 mm</p><ul><li>Safe use in the field, thanks to a high degree of protection</li><li>Screw connection: proven connection technology for a large selection of different conductors</li></ul>

1662528

SACC-M12MS-4CON-PG 7-M - Connector, Universal, 4-position, Plug straight M12, coding: A, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg7, external cable diameter 4 mm ... 6 mm

<h3>UCT-TMF 5 - Marker for terminal blocks</h3><p></p><ul><li>The UCT-TM... UniCard labeling range includes markers for Phoenix Contact products with tall and flat marker grooves, e.g. terminals</li><li>The markers, which are supplied in uniform sheets, can be marked quickly, easily, and precisely using the card printers</li><li>The sheets provide additional space for project information and function text that can be helpful during further assembly</li><li>The multi-section marking strips are easy to fit and can be easily separated if required</li><li>Marking service: Phoenix Contact can custom-mark all UniCard markers according to your specifications</li></ul>

0828744

<h3>PT 4 - Feed-through terminal block</h3><p>Feed-through terminal block, nom. voltage: 800 V, nominal current: 32 A, number of connections: 2, connection method: Push-in connection, Rated cross section: 4 mm2, cross section: 0.2 mm2 - 6 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray</p><ul><li>The compact design and front connection enable wiring in a confined space</li><li>In addition to the testing option in the double function shaft, all terminal blocks provide an additional test pick-off</li><li>The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free wiring of conductors with ferrules or solid conductors</li><li>Tested for railway applications</li></ul>

3211757

PT 4 - Feed-through terminal block, nom. voltage: 800 V, nominal current: 32 A, number of connections: 2, connection method: Push-in connection, Rated cross section: 4 mm2, cross section: 0.2 mm2 - 6 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray

<h3>SAC-4P-10,0-PUR/M12FS - Sensor/actuator cable</h3><p>Sensor/actuator cable, 4-position, PUR halogen-free, black-gray RAL 7021, free cable end, on Socket straight M12, coding: A, cable length: 10 m</p><ul><li>Easy and safe: 100 % electrically tested plug-in components</li></ul>

Phoenix Contact Blocs de jonction et connecteurs du circuit imprimé

Series

MC

DFK-MC

MVSTBR

MSTB

KGG-MC

MCV

IMC

FK-MC

LPC

FK-MCP

UMSTBVK

KGG-MSTB

FMC

MVSTBU

FRONT-MSTB

GMKDS

MSTBVA

MKKDS

DFK-MSTB

PW

MVSTBW

MSTBO

DFMC

TFKC

MSTBV

MKDS

DFK-PC

FBSK

QC

GMSTB

IC

FKCVW

BF-PC

CCA

CCDN

CCV

CCVA

CP-PT

D-FRONT

DFK-IPC

DFK-IPCV

DFK-MSTBA

DFK-MSTBVA

DMC

DMCC

DMCV

DMKDS

DP-PLW

DP-PWO

DP-UW

DP-UWV

EBP

EBPL

FFKDS-H

FFKDS-V

FFKDSA-H

FFKDSA-V

FFKDSA1-H

FFKDSA1-V

FK-MPT

FKC

FKCN

FKCOR

FKCOW

FKCS

FKCT

FKCVR

FKDSO

FKIC

FKICS

FMCD

FOPT

FRONT

FRONT-GMSTB

FRONT-MC

GFKC

GFKIC

GIC