Capteurs, interrupteurs et serrures de sécurité

DA 3A Convert. plate Mounting accessory

Anchor plate without permanent magnet. Delivered with cellular rubber.Without permanent magnet, there is no magnetic field when the Magne is unlocked, which avoid the accumulation of metallic particles on the anchor plate. 2 mounting holes.

Spring loaded catch for Gkey slide handle and Mkey slide lock. The catch prevents from closing the door by mistake: when the sliding handle is in open position, the catch must be pulled in order to push back the handle to closed position.

Safety Magnetic Switch, 2NC/1NO, Plastic, LED, 10m cable.

200A 3P HD N1 600V FUSIBLE SW

Magne 4X DYN M12-5 is an electromagnetic lock providing safe interlocking thanks to an an integrated Adam DYN safety sensor. Its M12-5 male connector facilitates connexion. A +24VDC voltage is used for the locking. The holding force is up to 1500N and the protection class IP67. The Eva actuactor and the anchor plate must be ordered separately.Magne is an electromagnetic process lock intended for locking doors and hatches. It is usually used to prevent unwanted process interruptions, e.g. during a welding operation. With Adam and Eva, a PLe can be reached for the interlocking function.

LS75M98B11-A is a 50 mm wide, reinforced Limit Switch made of zinc alloy material (Zamak), with 4 mounting holes at the top, 3 1/2'' NPT cable entries on the bottom and sides, pull action ring actuator and 1 N.O + 1 N.C snap action (Zb type) contacts

Flexible key for MKey safety switches. Stainless steel 316 key, die cast metal housing.

Slide lock for MKey8 and MKey9, left. Rugged metal construction that withstands shearing forces of up to 10000N (1000kg) on large hinged doors. MKey not included.

Mounting kit for Magne with anchor plates 32A and 32B. Steel. For hinged doors with a 5–15 mm door gap. Fits all Magne. Note: when used with Magne with integrated Adam, a mounting kit is also required for Eva (JSM D24).

JSM D24 is a mounting kit for the Eva actuator on a hinged door when used with an Adam safety sensor integrated in a Magne electromagnetic lock. Two distance plates DA1B are included.

200A 3P HD N3R 600V FUSIBLE SW

Eden is a non-contact safety sensor used as interlocking device for e.g. doors and safe position monitoring. Adam safety sensor with DYNlink signal and StatusBus. Used with an Eva actuator to form a non-contact safety sensor Eden. M12-5 male connector. Four pieces of DA 1B distance plates and four pieces of DA 2B distance rings are included.Adam senses the presence of Eva without mechanical contact and therefore without any wear. The compact size of Eden and its 360°mounting possibility make it easy to use in most applications.Eden is UL approved for use in US and Canada.

200A 3P HD N4X SS 600V NONFUSE

100A 3P DBL THR N1 600V NONFUSE

100A 3P HD N1 600V FUSIBLE

Safety Magnetic Switch, 2NC/1NO, Plastic, LED, 2m cable.

60A 3P HD N1 600V NONFUSE SW

60A 3P GD N1 240V NONFUSE SW

JSM D28 is an aluminum profile used as door handle and mounting kit for a complete Magne electromagnetic lock on a hinged door with a minimum opening radius of 200 mm. Magne is mounted directed on the door post, while the anchor plate and the Eva actuator, if applicable, are mounted on the JSM D28. JSMD28 covers the Magne unit completely when the door is closed.