Interrupteurs industriels

JSTD1-B is a Safeball with two contacts, 1NO and 1NC, and 4 wires, 0.2m, for direct connection into an enclosure. Its ergonomic design provides several grip possibilities, a low activation force of approximately 2N, and flexible mounting possibilities. This model allows a maximum load of 30VDC, 2A resistive. It offers an IP67 protection degree. Its body is made of polypropylene.Safeball is an ergonomic control device consisting of a spherical ball containing two pushbuttons, one on each side of the ball. Both buttons must be pressed in order to start and operate the machine. The risk of unintentional activation is thereby minimized Usually two Safeball are used together to form a two-hand control, and the operator must press all four push buttons simultaneously in order to operate the machine. If one or more of the buttons are released, a stop signal is given to the machine.

Tête en plastique Matériel de protection Interrupteur de porte de sécurité à verrouillage

Anchor plate without permanent magnet. Delivered with cellular rubber.Without permanent magnet, there is no magnetic field when the Magne is unlocked, which avoid the accumulation of metallic particles on the anchor plate. 2 mounting holes.

Actionneur à poussoir à broche scellée Configuration des contacts unipolaires et bilatéraux (SPDT) Interrupteur de fin de course

PS-5111-10-P16 Keyboard Controller

Spring loaded catch for Gkey slide handle and Mkey slide lock. The catch prevents from closing the door by mistake: when the sliding handle is in open position, the catch must be pulled in order to push back the handle to closed position.

Type d'actionneur à poussoir à galet Connecteur à courant direct (CC) Interrupteur de fin de course

3,56 mm Taille du trou de montage Unipolaire double (SPDT) Configuration des contacts Borne à vis Interrupteur de base

Levier d'articulation Interrupteur de base haute température

Actionneur à poussoir à rouleau scellé Type d'interrupteur de fin de course fermé

1/2-14 National Pipe Thread (NPT) Conduit Size Compact Guard Locking Safety Switch

Safety Magnetic Switch, 2NC/1NO, Plastic, LED, 10m cable.

00456918 Key Operated Switch (Stainlless Steel Body, Standard lock/Stainless steel with padlockable dustcover, 20Amp 2xNO 2xNC, Metal Enclosure.

Type de connexion des fils volants Actionneur sans contact

Type d'actionneur à levier à galet Interrupteur de fin de course

OA1G01 AUXILIARY CONTACT

LOADSW. 32A 0-1 3P FRONT MO

Montage horizontal Clé de commande réglable pour l'interrupteur D4SL-N

Adjustable extension shaft

Rouleau de charnière Levier court Type d'actionneur Interrupteur de fin de course