Interrupteurs industriels
IPM2R is a Mini Foot Switch with light grey base and red ABS cover. The pedal movement is free and the switch is equipped with 1 soft cable entry and 1 N.O or N.C contact.
Pas en stock
4,2 mm Taille du trou de montage Unipolaire double (SPDT) Configuration des contacts Borne à vis Interrupteur de base
IPSG1D11 is a Covered Foot Switch with grey base and grey ABS cover. The pedal movement is free and the switch is equipped with 1 Pg16 cable entry and 1 N.O + 1 N.C slow action (Zb type), overlapping (late closing) contacts.
Pas en stock
IPSG2A11 is a Covered Foot Switch with grey base and grey ABS cover. The pedal movement is maintained and locked in neutral (up) position and the switch is equipped with 1 Pg16 cable entry and 1 N.O + 1 N.C snap action (Za type) contacts.
Pas en stock
IPSY1B11 is a Covered Foot Switch with grey base and yellow ABS cover. The pedal movement is free and the switch is equipped with 1 Pg16 cable entry and 1 N.O + 1 N.C snap action (Zb type) contacts.
Pas en stock
JSHD4H2B 0.15m is a three-position device for external panel mounting with 6 leads, each 150mm long, and mounting holes up right. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.
Pas en stock
JSHD4H2 1.2m is a three-position device for internal panel mounting with 6 leads, each 1200mm long.Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.
Pas en stock
The JSHD4-2 Black is a black top part of a three-position device JSHD4. It has LEDs, a front button and a top button. It must be used with one of the following bottom parts: AB, AD, AH, AJ, AK, AL. Anti-tamper can be chosen as option with all except bottom part AK. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.
Pas en stock
LS40M41B11 is a 40 mm wide, standard reinforced Limit Switch made of zinc alloy material (Zamak), with 4 mounting holes at the top and bottom, 1 Pg13.5 cable entry on the bottom, plastic roller lever (Ø22 mm) actuator and 1 N.O + 1 N.C snap action (Zb type) contacts
Pas en stock
Actionneur à poussoir à galet scellé Configuration des contacts unipolaires et bilatéraux (SPDT) Interrupteur de fin de course
Pas en stock
Rouleau de charnière Type d'actionneur à levier Interrupteur de fin de course
Pas en stock