Interrupteurs industriels

Actionneur à levier à galet Configuration des contacts unipolaires et bipolaires (SPDT) Interrupteur de fin de course

IPM1B is a Mini Foot Switch with black base and black ABS cover. The pedal movement is free and the switch is equipped with 1 soft cable entry and 1 N.O or N.C contact.

IPM1G is a Mini Foot Switch with black base and grey ABS cover. The pedal movement is free and the switch is equipped with 1 soft cable entry and 1 N.O or N.C contact.

IPM1R is a Mini Foot Switch with black base and red ABS cover. The pedal movement is free and the switch is equipped with 1 soft cable entry and 1 N.O or N.C contact.

IPSG1A22 is a Covered Foot Switch with grey base and grey ABS cover. The pedal movement is free and the switch is equipped with 1 Pg16 cable entry and 2 N.O + 2 N.C snap action (Za type) contacts.

IPSG3A11 is a Covered Foot Switch with grey base and grey ABS cover. The pedal movement is maintained and locked in activated (low) position and the switch is equipped with 1 Pg16 cable entry and 1 N.O + 1 N.C snap action (Za type) contacts.

IPSXCA11 is a contact bloc for IPS with 1 N.O + 1 N.C snap action (Za type) contacts.

IPSY1D11 is a Covered Foot Switch with grey base and yellow ABS cover. The pedal movement is free and the switch is equipped with 1 Pg16 cable entry and 1 N.O + 1 N.C slow action (Zb type), overlapping (late closing) contacts.

IPSY3A11 is a Covered Foot Switch with grey base and yellow ABS cover. The pedal movement is maintained and locked in activated (low) position and the switch is equipped with 1 Pg16 cable entry and 1 N.O + 1 N.C snap action (Za type) contacts.

Longueur de câble de 6 m Interrupteur magnétique sans contact

Type de connexion des fils volants Actionneur sans contact

LS25M12B11-U01 is a 35 mm wide, compact Limit Switch made of zinc alloy material (Zamak), with 2 mounting holes at the top, a prewired UL62 - PVC cable (1 m) on the side, steel roller plunger actuator and 1 N.O + 1 N.C snap action (Zb type) contacts

LS26M12B11-U01 is a 35 mm wide, compact Limit Switch made of zinc alloy material (Zamak), with 2 mounting holes at the top, a prewired UL62 - PVC cable (1 m) on the bottom, steel roller plunger actuator and 1 N.O + 1 N.C snap action (Zb type) contacts

LIMIT SWITCH BRASS PLAIN PLUNGER

LS35P11D11-R is a 30 mm wide, standard Limit Switch with a reset button made of fiber-glass reinforced UL-V0 material, with 2 mounting holes at the top, 1 1/2'' NPT cable entry on the bottom, plain steel plunger actuator and 1 N.O + 1 N.C slow action (Zb type), overlapping (late closing) contacts

LS35P12B11 is a 30 mm wide, standard Limit Switch made of fiber-glass reinforced UL-V0 material, with 2 mounting holes at the top, 1 1/2'' NPT cable entry on the bottom, steel roller plunger actuator and 1 N.O + 1 N.C snap action (Zb type) contacts

LS35P13D11-R is a 30 mm wide, standard Limit Switch with a reset button made of fiber-glass reinforced UL-V0 material, with 2 mounting holes at the top, 1 1/2'' NPT cable entry on the bottom, plastic roller plunger actuator and 1 N.O + 1 N.C slow action (Zb type), overlapping (late closing) contacts

LS35P13L20 is a 30 mm wide, standard Limit Switch made of fiber-glass reinforced UL-V0 material, with 2 mounting holes at the top, 1 1/2'' NPT cable entry on the bottom, plastic roller plunger actuator and 2 N.O slow action, simultaneous contacts

LS35P15B02 is a 30 mm wide, standard Limit Switch made of fiber-glass reinforced UL-V0 material, with 2 mounting holes at the top, 1 1/2'' NPT cable entry on the bottom, pull-out 90° angled key actuator and 2 N.C snap action (Zb type) contacts

LS35P15B11 is a 30 mm wide, standard Limit Switch made of fiber-glass reinforced UL-V0 material, with 2 mounting holes at the top, 1 1/2'' NPT cable entry on the bottom, pull-out 90° angled key actuator and 1 N.O + 1 N.C snap action (Zb type) contacts