Interrupteurs industriels
LS45M52B11 is a 40 mm wide, standard reinforced Limit Switch made of zinc alloy material (Zamak), with 4 mounting holes at the top and bottom, 1 1/2'' NPT cable entry on the bottom, adjustable steel roller lever (Ø22 mm) actuator and 1 N.O + 1 N.C snap action (Zb type) contacts
Pas en stock
1 contact normalement fermé (NF)/1 contact normalement ouvert (NO) (action lente), longueur de câble de 5 m et entrée de câble horizontale Interrupteur de fin de course de sécurité
Pas en stock
Magne 4 DYN-2Info is an electromagnetic lock providing safe interlocking thanks to an integrated ADAM DYN-Info. Its M12-8 male connector facilitates connexion. A +24VDC voltage is used for the locking. The holding force is up to 1500N and the protection class IP67. Separate "Locked" and "Closed" information outputs are availableThe Eva actuactor and the anchor plate must be ordered separately. Magne is an electromagnetic process lock intended for locking doors and hatches. It is usually used to prevent unwanted process interruptions, e.g. during a welding operation. With Adam and Eva, a PLe can be reached for the interlocking function.
Pas en stock
Type d'actionneur à rouleaux croisés scellés Connecteur à courant direct (CC) Interrupteur de fin de course
LS35P11B11 is a 30 mm wide, standard Limit Switch made of fiber-glass reinforced UL-V0 material, with 2 mounting holes at the top, 1 1/2'' NPT cable entry on the bottom, plain steel plunger actuator and 1 N.O + 1 N.C snap action (Zb type) contacts
Pas en stock
2 normalement fermés (NC)/1 normalement ouverts (NO) (action lente) Configuration des contacts Interrupteur de fin de course de sécurité
Type d'actionneur à rouleaux croisés scellés Connecteur à courant direct (CC) Interrupteur de fin de course



















