Interrupteurs industriels

SWITCH OPER SHAFT P/PY 533MM

JSTD25K is a two-hand device with two JSTD1-B Safeball and one emergency stop button Smile 10 EK. The Safeball are mounted on each end of a 44x88 aluminum profile designed for two-hand applications. The emergency stop button is mounted on top. All are pre-wired to a M12-8 male connector. The Safeball are protected by flanges.The JSTD25 control stations are pre-built two-hand devices offering the good ergonomics of Safeball. They can be used as fixed devices that are easy to install, or as mobile devices. All models are equipped with flanges to protect the Safeball from accidental operation, and from damage if the device is dropped on the floor when used as mobile device.

60A 3P HD N1 600V NONFUSE SW

Key Switch Standard Lock Standard Dustcover 20Amp 2xNO 2xNC switch Panel Mounted, IP67

3,56 mm Taille du trou de montage Unipolaire double (SPDT) Configuration des contacts Borne à vis Interrupteur de base

Interrupteur unipolaire à double tour (SPDT) Réceptacle

Interrupteur de porte de sécurité verrouillable en acier inoxydable SUS316

Actionneur à levier à galet Configuration des contacts unipolaires et bipolaires (SPDT) Interrupteur de fin de course

Type de connexion des fils volants Actionneur sans contact

Tête en plastique Matériel de protection Interrupteur de porte de sécurité à verrouillage

LS45P52B11 is a 40 mm wide, standard reinforced Limit Switch made of fiber-glass reinforced UL-V0 material, with 4 mounting holes at the top and bottom, 1 1/2'' NPT cable entry on the bottom, adjustable steel roller lever (Ø22 mm) actuator and 1 N.O + 1 N.C snap action (Zb type) contacts

Commutateur de sécurité sans contact jusqu'à Cat. 4, PL e (EN ISO 13849), SIL 3 (CEI 61508), Capteur unicode à détrompage RFID, Format 4 (EN ISO 14119), démarrage automatique ou manuel, diagnostic intégré, alimentation 24 V DC, IP69K, connecteur M12

Longueur de câble de 5 mm Interrupteur de verrouillage de sécurité sans contact

LS35P51B11 is a 30 mm wide, standard Limit Switch made of fiber-glass reinforced UL-V0 material, with 2 mounting holes at the top, 1 1/2'' NPT cable entry on the bottom, adjustable plastic roller lever (Ø18 mm) actuator and 1 N.O + 1 N.C snap action (Zb type) contacts

Interrupteur de porte de sécurité verrouillable en acier inoxydable SUS316

Enclosed Switch Disconnector, 3-p. Max. Horse power rating at three phase 480V 40HP. General purpose current rating 60A. Steel sheet enclosure, NEMA Type 3R Rainproof, 12 Indoor, Pistol handle. Interlocked cover. Defeatable interlocking.

60A 3P GD N1 240V NONFUSE SW

JSM D28 is an aluminum profile used as door handle and mounting kit for a complete Magne electromagnetic lock on a hinged door with a minimum opening radius of 200 mm. Magne is mounted directed on the door post, while the anchor plate and the Eva actuator, if applicable, are mounted on the JSM D28. JSMD28 covers the Magne unit completely when the door is closed.

Connecteur M12 Type de connexion Actionneur sans contact

Tête en plastique Matériel de protection Interrupteur de porte de sécurité à verrouillage