CADFR
Cart
721 Products
Filtres

Relais à semi-conducteurs (SSR)

721 articles
G3PW-A220EU-C
1 à 20 A Courant de charge alternatif (CA) Contrôleur de puissance monophasé
Pas en stock
G3PWA245ECCFLK
CONTRÔLE DE PHASE, 45A, CHAUFFAGE, COMMS RS485
Pas en stock
G3PWA245ECSFLK
CONTRÔLE DE PHASE, 45A SSR, CHAUFFAGE BURNOUT, RS485 COMMS, VIS
Pas en stock
G3S201PLPDUSDC12
SSR,1.2A 75-264VAC SWITCHIN
Pas en stock
G3S201PLPDUSDC24
Solid-state relay, Ultra-small, PCB mounting, 4-pin, 1-pole, 1 A at 100-240 VAC
Pas en stock
G3SD-Z01P-PD-US DC12
6 à 14,4 V Tension d'entrée CC de fonctionnement [Max] Circuit imprimé (PCB) Relais statique
Pas en stock
G3SD-Z01P-US DC24
26,4 à 32 V Tension d'entrée CC de fonctionnement [Max] Carte de circuit imprimé (PCB) Relais statique
Pas en stock
P2RV4200C
G2RV interface cable for use between CJ1W-OD232/OD262 and 4 P2RV-8-O-F modules, 2 m
37 Stock du fabricant
USA
37
G32A-A420-VD-2 DC12-24
Module d'alimentation
26 Stock du fabricant
USA
26
G3NE-210T-US DC5
Tension d'entrée CC de fonctionnement de 4 à 6 V Relais statique (borne à onglet)
752 Stock du fabricant
USA
752
CR-M110DC4LG
The CR-M110DC4LG pluggable interface relay is a miniature relay with gold-plated contacts, which is to be plugged into a suitable ABB CR-M socket. Plugged into a socket, the combination of relay and socket may be seemlessly snap-on mounted onto a DIN Rail.This relay operates with a 110 V DC rated control supply voltage and has a 4 c/o (SPDT) output with contacts rated at 250 V / 6A, enabling the possibility of switching multiple circuits with a single input signal. The relay has an integrated test button which is used for the manual actuation of the relay by locking it's output contacts. The test button facilitates easy testing and commissioning. The relay also has an integrated LED, which provides the visual indication of the energization of the relay coil. Furthermore, the gold-plated contacts ensure contact reliability particularly necessary in applications where small currents and loads are to be switched. Standard sockets, logic sockets, pluggable function modules, holders and markers are available as accessories. Standard sockets, logical sockets, pluggable function modules, holder and marker are available as accessories.
Pas en stock
G3PJ-515B DC12-24
264 à 600 V Tension de charge nominale en CA [Max] Relais statique monophasé pour radiateurs avec dissipateur thermique
Pas en stock
G3PJ-225B-PU DC12-24
120 à 240 V Tension de charge nominale AC [Max] Relais statique monophasé pour radiateurs avec dissipateur thermique
239 Stock du fabricant
USA
239
G3NE-210T-US DC24
19,2 à 28,8 V Tension d'entrée CC de fonctionnement Relais statique (borne à onglet)
3 En stock
Laval, QC
3
Stock fabricant
USA
672
Y92BN100
DISSIPATEUR THERMIQUE POUR G3NE-220T(L)
Pas en stock
RB121G-12VDC
The RB121G-12VDC is a boxed interface relay with screw terminals, which can be seemlessly snap-on mounted onto a DIN Rail. The relay is soldered into device housing, ensuring a high resistance against vibration.This relay operates with a 12 V DC rated control supply voltage and has a 1 c/o (SPDT) output with gold-plated contacts rated at 250 V / 6 A. This 6mm wide boxed interface relay may be used for electrical isolation, amplification and signal matching and enables the switching of high currents on a small footprint. It has an integrated LED, which provides the visual indication of the energization of the relay coil and UL 94-V0 certified device housing, improving safety by providing high levels flame retardation. Jumper bars are available as accessories.
Pas en stock
RBR121-24VDC
The RBR121-24VDC is a boxed interface relay with spring terminals, which can be seemlessly snap-on mounted onto a DIN Rail. The relay is soldered into device housing, ensuring a high resistance against vibrationand this is further enhanced by the spring terminals which improve contact reliability by automatically adjusting the tension to the wire gauge.This relay operates with a 24 V DC rated control supply voltage and has a 1 c/o (SPDT) output with contacts rated at 250 V / 6 A. This 6mm wide boxed interface relay may be used for electrical isolation, amplification and signal matching and enables the switching of high currents on a small footprint. It has an integrated LED, which provides the visual indication of the energization of the relay coil and UL 94-V0 certified device housing, improving safety by providing high levels flame retardation. Jumper bars are available as accessories.
Pas en stock
RBR121G-24VDC
The RBR121G-24VDC is a boxed interface relay with spring terminals, which can be seemlessly snap-on mounted onto a DIN Rail. The relay is soldered into device housing, ensuring a high resistance against vibrationand this is further enhanced by the spring terminals which improve contact reliability by automatically adjusting the tension to the wire gauge.This relay operates with a 24 V DC rated control supply voltage and has a 1 c/o (SPDT) output with gold-plated contacts rated at 250 V / 6 A. This 6mm wide boxed interface relay may be used for electrical isolation, amplification and signal matching and enables the switching of high currents on a small footprint. It has an integrated LED, which provides the visual indication of the energization of the relay coil and UL 94-V0 certified device housing, improving safety by providing high levels flame retardation. Jumper bars are available as accessories.
Pas en stock
CR-S005VDC1R
The CR-S005VDC1R is a slim pluggable interface relay is suitable for direct mounting on a printed circuit board or use in conjunction with ABB's sockets. Plugged into a socket, the combination of relay and socket may be seemlessly snap-on mounted onto a DIN Rail. This relay operates with a 05 V DC rated control supply voltage and has a 1 c/o (SPDT) output with contacts rated at 250 V / 6 A.This slim pluggable interface relays may be used for electrical isolation, amplification and signal matching. The CR-S relays are 6.2 mm wide and therefore allow for the switching of high currents on a small footprint. Moreover, CR-S relays are UL 94-V0 certified, improving safety by providing high levels flame retardation. Screw and spring sockets, jumper bars and markers are available as accessories.
Pas en stock
CR-S005VDC1RG
The CR-S005VDC1RG is a slim pluggable interface relay, with gold-plated output contacts, which is suitable for direct mounting on a printed circuit board or use in conjunction with ABB's sockets. Plugged into a socket, the combination of relay and socket may be seemlessly snap-on mounted onto a DIN Rail. This relay operates with a 05 V DC rated control supply voltage and has a 1 c/o (SPDT) output with contacts rated at 250 V / 6 A.This slim pluggable interface relays may be used for electrical isolation, amplification and signal matching. Its gold-plated contacts ensure contact reliability particularly necessary in applications where small currents and loads are to be switched. The CR-S relays are 6.2 mm wide and therefore allow for the switching of high currents on a small footprint. Moreover, CR-S relays are UL 94-V0 certified, improving safety by providing high levels flame retardation. Screw and spring sockets, jumper bars and markers are available as accessories.
Pas en stock

721 Articles