Relais à semi-conducteurs (SSR)

Tension d'entrée de 4 à 30 V CC Relais statique Relais statique enfichable

Tension d'entrée de 4 à 30 V CC Relais statique Relais statique enfichable

120 à 240 V Tension CA de charge nominale [Max] Circuit imprimé (PCB) Relais d'entrée/sortie (I/O) à semi-conducteurs

24 à 48 V Tension CC de charge nominale [Max] Carte de circuit imprimé (PCB) Relais d'entrée/sortie (I/O) à semi-conducteurs

24 à 48 V Tension CC de charge nominale [Max] Carte de circuit imprimé (PCB) Relais d'entrée/sortie (I/O) à semi-conducteurs

120 à 240 V Tension de charge nominale AC [Max] Relais statique monophasé pour radiateurs avec dissipateur thermique

Barre transversale à 4 pôles

Barre transversale à 10 pôles

Barre transversale à 10 pôles

Barre transversale 20 pôles

The CR-P110DC2 pluggable interface relay is suitable for direct mounting on a printed circuit board or use in conjunction with ABB's sockets. This relay operates with a 110 V DC rated control supply voltage and has a 2 c/o (SPDT) output with contacts rated at 250 V / 8 A, enabling the possibility of switching multiple circuits with a single input signal. Coupled with a socket, the compact size of this relay offers possibilities to save space within a control panel. Furthermore, with an IP degree of 67, this relay offers complete protection against ingress of dust and airborne particles & protection against water and liquids, up to and including immersion in up to one meter of water. Standard sockets, logical sockets, pluggable function modules, holder and marker are available as accessories.

G3NA-425B-UTU-2 DC5-24, SSR,25A 200-480VAC,SCREW TERM.LED,0-CROSS

G3PE-545B DC12-24, SSR, 45A, 1-PHASE, 180-528VAC, HEAT SINK

The RBR121G-48-60VUC is a boxed interface relay with spring terminals, which can be seemlessly snap-on mounted onto a DIN Rail. The relay is soldered into device housing, ensuring a high resistance against vibrationand this is further enhanced by the spring terminals which improve contact reliability by automatically adjusting the tension to the wire gauge.This relay operates with a 48-60 V AC/DC rated control supply voltage and has a 1 c/o (SPDT) output with gold-plated contacts rated at 250 V / 6 A. This 6mm wide boxed interface relay may be used for electrical isolation, amplification and signal matching and enables the switching of high currents on a small footprint. It has an integrated LED, which provides the visual indication of the energization of the relay coil and UL 94-V0 certified device housing, improving safety by providing high levels flame retardation. Jumper bars are available as accessories.

Spring optocoupler OBROA1000-24VDC: 24VDC Rated control supply voltage/ solid-state output rated 24-400VAC, 25 mA up to 1 A with integrated LED

19,2 à 28,8 V de fonctionnement Courant continu (DC) Borne de tension d'entrée Relais statique (SSR)

The CP-P/M 92CV plug-in module is a pluggable funtion module for sockets of the CR-P and CR-M range. This module provides overvoltage protection and a green LED indication. The rated control supply voltage is 110-230 V AC/DC.

CR-S220/240VADC1SZ Socket 1c/o, A1-A2=220-240VAC/DC, 250VAC spring terminals

The RB121-230VUC is a boxed interface relay with screw terminals, which can be seemlessly snap-on mounted onto a DIN Rail. The relay is soldered into device housing, ensuring a high resistance against vibration.This relay operates with a 230 V AC/DC rated control supply voltage and has a 1 c/o (SPDT) output with contacts rated at 250 V / 6 A. This 6mm wide boxed interface relay may be used for electrical isolation, amplification and signal matching and enables the switching of high currents on a small footprint. It has an integrated LED, which provides the visual indication of the energization of the relay coil and UL 94-V0 certified device housing, improving safety by providing high levels flame retardation. Jumper bars are available as accessories.

The RB121G-24VUC is a boxed interface relay with screw terminals, which can be seemlessly snap-on mounted onto a DIN Rail. The relay is soldered into device housing, ensuring a high resistance against vibration.This relay operates with a 24 V AC/DC rated control supply voltage and has a 1 c/o (SPDT) output with gold-plated contacts rated at 250 V / 6 A. This 6mm wide boxed interface relay may be used for electrical isolation, amplification and signal matching and enables the switching of high currents on a small footprint. It has an integrated LED, which provides the visual indication of the energization of the relay coil and UL 94-V0 certified device housing, improving safety by providing high levels flame retardation. Jumper bars are available as accessories.