Alimentations industrielles

Power Supply, 300 W, 100 to 240 VAC input, 24 VDC, 14 A output, DIN-rail mounting, remote control

Tension de sortie 24 V courant continu (DC) Alimentation fiable et performante

Power Supply, 600 W, 100 to 240 VAC input, 24 VDC, 27 A output, DIN-rail mounting, remote control

Tension de sortie 24 V courant continu (DC) Alimentation fiable et performante

Tension de sortie 24 V courant continu (DC) Alimentation fiable et performante

Power Supply, 600 W, 100 to 240 VAC input, 24 VDC, 27 A output, direct mounting, remote control

Power Supply, 600 W, 100 to 240 VAC input, 24 VDC, 27 A output, direct mounting, paralell operation

Tension de sortie 24 V courant continu (DC) Alimentation fiable et performante

The CP-C.1 24/5.0-C is a power supply from the CP-C.1 range with coated PCBA. The primary switch mode power supply offers a wide range input of 85-264 V AC and 90-300 V DC, rated input voltage is 110-240 V AC. The rated output power is 120 W, rated output current is 5 A at an output voltage of 24 V DC. The output voltage is adjustable within a range of 22.5 to 28.5 V DC. The power supply provides a U/I output characteristic with a power reserve of up to 50 % and allows parallel operation to increase capacity and to enable redundancy. ATEX and IECEx approvals are available to be used in hazardous area applications. Further features are: power factor correction acc. to EN 61000-3-2. Redundancy unit and buffer modules are available as accessories.

Alimentation électrique pour profilés à découpage primaire. Entrée AC : pour un fonctionnement entre deux phases (400 V AC). Entrée DC : pour un fonctionnement sur un circuit intermédiaire FU. Sortie : 24 V DC / 20 A.

Module de batterie, technologie LI-ION, 24 V DC, 924 Wh, pour des températures ambiantes de -25 °C ... 60 °C, détection automatique et communication avec le QUINT UPS-IQ

The CP-C.1-A-RU-C is a redundancy unit for CP-C.1 range power supplies. The input voltage range is 10 - 58 V DC. This unit, with 2 inputs / channels each up to 20 A and an output up to 40 A, provides true redundancy by 100 % decoupling of two parallel connected CP-C.1 range power supplies. ATEX and IECEx approvals are available to be used in hazardous area applications.

The CP-C.1 24/20.0-C is a power supply from the CP-C.1 range with coated PCBA. The primary switch mode power supply offers a wide range input of 85-264 V AC and 90-300 V DC, rated input voltage is 110-240 V AC. The rated output power is 480 W, rated output current is 20 A at an output voltage of 24 V DC. The output voltage is adjustable within a range of 22.5 to 28.5 V DC. The power supply provides a U/I output characteristic with a power reserve of up to 30 % and allows parallel operation to increase capacity and to enable redundancy. ATEX and IECEx approvals are available to be used in hazardous area applications. Further features are: power factor correction acc. to EN 61000-3-2. Redundancy unit and buffer modules are available as accessories

Power Supply, 100 W, 100 to 240 VAC input, 24 VDC, 4.5 A output, direct mounting, connector

Power Supply, 150 W, 100 to 240 VAC input, 24 VDC, 6.5 A output, direct mounting, connector

Alimentation TRIO POWER à découpage primaire dans un boîtier coulé sous pression IP67, entrée : triphasée, sortie : 24 V DC/20 A

Alimentation à découpage primaire TRIO POWER, Raccordement Snap-on, Montage du système Cross Power, entrée: 3 phasée, sortie : 24 V DC / 5 A

Batterie de rechange pour les modules de batterie UPS-BAT/VRLA...

PS, DIN, SLIM, PLASTIC, 100W, 24V

PS, DIN, SLIM, PLASTIC, 100W, 48V