Composants de distribution et de protection électrique

A fully optimized four-pole DC switch-disconnector for 1000V utility-scale photovoltaic power plants covering 250-1000A current range. The new design offers both a size reduction and an increase in efficiency and performance. The four-pole 1000V DC Switch helps manufacturers improve system efficiency. The compact size of the new OTDC range makes it possible for manufacturers to reduce the size of combiner boxes and inverters.Main characteristics for this switch:Disconnect double PV circuit, Approved according to UL98B and IEC 60947-1,-3,

ABB offers new OTDC Switch-disconnectors specially designed for reliable switching for ESS applications were higher performance is needed. They are durable and virtually maintenance-free, and offer easy installation for all imaginable situations.Depending on the ESS layout and the customer’s wishes, the OTDC switch-disconnectors may be used in one or more sections of the overall setup, for the battery protection.Main characteristics of this particular OTDC type:Rated conditional short circuit current with fuses is 30kA, 4-Pole, 1500Vdc, Approved according to UL98B and IEC 60947-1,-3

OTDCKIT400FS11 Connection Bar Kit - Connection bar for connecting two adjacent pole-terminals. Includes screws and nuts. Suitable for DC Switches M-series: OTDC250...400UF_22. Package of 2pcs.

OTDCKIT600FS11 Connection Bar Kit - Connection bar for connecting two adjacent pole-terminals. Includes screws and nuts. Suitable for DC Switches M-series: OTDC600UF_22. Package of 2pcs.

OTDCKIT800FS11 Connection Bar Kit - Connection bar for connecting two adjacent pole-terminals. Includes screws and nuts. Suitable for DC Switches M-series: OTDC800F_UF_22 and OTDC1000F_UF_22. Package of 4pcs.

3-pole, motor operated, base mounted switch-diconnector with handle for manual operation, terminal bolt kit, handle and spare fuse storage clip and male connector for control circuit

Including a handle for manual operation, bolt kit with nut and washers for all terminals and male connectors for control circuits. Include a storage clip for the handle and spare fuses.

OHM45L6 PISTOL HANDLE

3-pole, front operated, base mounted switch-diconnector with black IP65 handle and shaft, terminal bolt kit included

A fully optimized four-pole DC switch-disconnector for 1000V utility-scale photovoltaic power plants covering 250-1000A current range. The new design offers both a size reduction and an increase in efficiency and performance. The four-pole 1000V DC Switch helps manufacturers improve system efficiency. The compact size of the new OTDC range makes it possible for manufacturers to reduce the size of combiner boxes and inverters.Main characteristics for this switch:Disconnect double PV circuit, Approved according to UL98B and IEC 60947-1,-3,

ABB offers new OTDC Switch-disconnectors specially designed for reliable switching for ESS applications were higher performance is needed. They are durable and virtually maintenance-free, and offer easy installation for all imaginable situations.Depending on the ESS layout and the customer’s wishes, the OTDC switch-disconnectors may be used in one or more sections of the overall setup, for the battery protection.Main characteristics of this particular OTDC type:Rated conditional short circuit current with fuses is 30kA, 4-Pole, 1500Vdc, Approved according to UL98B and IEC 60947-1,-3

OTDC25UT4 PV Disconnect Switch, Terminal bolt kit included, Handle and shaft need to be ordered separately, Door mounting, UL 600 VDC 25 A double circuit, IEC 660 VDC 25 A double circuit, IEC 1000 VDC 16 A double circuit

A fully optimized four-pole DC switch-disconnector for 1500V utility-scale photovoltaic power plants covering 250-630A current range. The new design offers both a size reduction and an increase in efficiency and performance to help manufacturers adapt to the industry’s rapid adoption of 1500V DC solutions.The four-pole 1500V DC concept helps manufacturers improve system efficiency, reducing switch losses. The compact size of the new OTDC range makes it possible for manufacturers to reduce the size of combiner boxes and inverters.Main characteristics of this particular OTDC type:Disconnect double PV circuit, Approved according to UL98B and IEC 60947-1,-3

OTDV400FK1 Direct Mounted Handle Kit - Direct mounted handle with handle lenght 95mm. Suitable for OTDC315…800F_ and OTDC250…600UF_ M-series. Package contains 1pc direct mounted handle, mechanism cover and shaft. Recommended to use with OTDC_F 2-pole switch.

Handle storage clip

TERM.KIT,400A FUS/NF SW 3 LUGS

MOUNTING SET

17 INCH SHAFT

OHB125LH12 HANDLE

OT switch-disconnectors are suitable for a wide range of demanding applications such as machinery, power distribution, switchboards and motor control center installations. These devices are globaly available and comply with all relevant standards. The complete OT range is available from 16A to 4000A for IEC and 16A to 2000A for UL market. Thanks to their modular structure from 160A and upward, they also help to create purpose-built solutions with the right pole configuration and can be equipped with direct mount handles or side-operated. The smart design eliminates also the need of major customization for busbar connections which saves costs. The switches can be found in both manual and motorized applications. The complete range also include a comprehensive range of inbuilt safety features and offers snap-on accessories that saves installation time and costs.