Produits d'alimentation

3-pole, front operated, base mounted switch-diconnector with protected clamp terminals, handle and shaft are not included

BRAKING RESISTOR 80 OHMS - 2000W NEMA1

Alimentation STEP POWER à découpage primaire pour montage sur profilé, entrée : monophasée, sortie : 12 V DC / 1,5 A

Convertisseur DC/DC à découpage primaire, QUINT POWER, Montage sur rail DIN, entrée: 12 V DC - 24 V DC, sortie : 24 V DC / 2,5 A

RÉACTANCES 480 Volts Low-Z 3% 25 HP TYPE FERMÉ

AJT 600A 600VAC/500VDC, time delay/class J

RÉACTANCES 480 Volts Low-Z 3% 20 HP TYPE OUVERT

EDISON FUSEHOLDER CLASS CC 1POLE

Mechanism kit for flange operated switches

Convertisseur CC/CC QUINT à découpage primaire pour montage sur profilé avec technologie SFB (Selective Fuse Breaking), entrée : 96-110 V CC, sortie : 24 V CC / 10 A

Module de redondance, 5 V - 24 V DC, 2x 10 A, 1x 20 A.

Pour les installations neuves, utilisez les articles suivants : 1066703, 1066716, 1066718, 1066714.Convertisseur DC/DC MINI à découpage primaire pour montage sur rail DIN, entrée : 12 - 24 V DC, sortie : 24 V DC/1 A

The CP-C.1 24/20.0 is a power supply from the CP-C.1 range. The primary switch mode power supply offers a wide range input of 85-264 V AC and 90-300 V DC, rated input voltage is 110-240 V AC. The rated output power is 480 W, rated output current is 20 A at an output voltage of 24 V DC. The output voltage is adjustable within a range of 22.5 to 28.5 V DC. The power supply provides a U/I output characteristic with a power reserve of up to 30 % and allows parallel operation to increase capacity and to enable redundancy. Further features are: power factor correction acc. to EN 61000-3-2. Redundancy unit and buffer modules are available as accessories

TRANSFO, Prim 480/600V /// Sec 120/240V, 150VA

TRANSFO DE CONTRÔLE P600 S120 100 VA

100VA, 60Hz, P : 480/600 – S : 120

240 W Puissance de sortie Alimentation à découpage

The CP-E 5/3.0 is a power supply from the CP-E range. The primary switch mode power supply offers a wide range input of 90-264 V AC and 120-375 V DC, rated input voltage is 100-240 V AC. The rated output power is 15 W, rated output current is 3.0 A at an output voltage of 5 V DC. The output voltage is adjustable within a range of 4.5 to 5.75 V DC. The output characteristic is hiccup-mode. The power supply allows parallel operation to enable redundancy. A redundancy unit is available as accessory.

OHY45J6 PISTOL HANDLE

ABB offers new OTDC Switch-disconnectors specially designed for reliable switching for ESS applications were higher performance is needed. They are durable and virtually maintenance-free, and offer easy installation for all imaginable situations.Depending on the ESS layout and the customer’s wishes, the OTDC switch-disconnectors may be used in one or more sections of the overall setup, for the battery protection.Main characteristics of this particular OTDC type:Rated conditional short circuit current with fuses is 30kA, 4-Pole, 1500Vdc, Approved according to IEC 60947-1, -3