ABB Contrôleurs de moteur
Les contrôleurs de moteur ABB offrent des solutions fiables aux besoins de contrôle et de protection des moteurs. Conçus pour l'efficacité et la sécurité, ces contrôleurs assurent un fonctionnement précis des moteurs et protègent les équipements contre les défaillances. Idéaux pour diverses applications, les contrôleurs ABB améliorent les performances et minimisent les temps d'arrêt, ce qui les rend essentiels pour optimiser vos systèmes motorisés.
UMC100-PAN is a LCD Panel with USB Interface for connection to a PC. It can be directly mounted onto the UMC100.3 motor controller. Or it also can be mounted at the front of a drawer and connected to the UMC100.3 via the UMC100-CAB.xx0.
Pas en stock
The PNQ22-FBP.0 Ethernet communication module supports the PROFINET network protocol and allowes the connection of up to 4 UMC100.3 motor controllers. Can be mounted to DIN rail.
Pas en stock
External current transformer for currents up to 185 A primary side. The secondary side is feed to the UMC100.3 motor controller. This enables the UMC100.3 to see up to the primary current.
Pas en stock
Additional terminal blocks for PNQ22 or MTQ22 data connection to UMC100. 50 pieces per package. (spare parts)
Pas en stock
External current transformer for currents up to 310 A primary side. The secondary side is feed to the UMC100.3 motor controller. This enables the UMC100.3 to see up to the primary current.
Pas en stock
DX122 IO-Module for UMC100, 8 DI 110-230 V AC, 4 DO, 1AO, Supply 24 V DC. One digital extension module can be connected at the same time.
Pas en stock
The EIU32.0 EtherNet/IP communication interface supports the EtherNet/IP network protocol. It is mountable onto the UMC100.3, or on a SMK3.0 mounting kit.
Pas en stock
Set of all terminal blocks for the UMC100.3 AC versions, including terminal blocks for Power Supply, DI, DO, PTC, Data connection.
Pas en stock
The MTQ22-FBP.0 Ethernet communication module supports the Modbus TCP network protocol and allowes the connection of up to 4 UMC100.3 motor controllers. Can be mounted to DIN rail.
Pas en stock
DX111 IO-Module for UMC100, 8 DI 24 V DC, 4 DO, 1AO, Supply 24 V DC. One digital extension module can be connected at the same time.
Pas en stock
Voltage expansion module for UMC100. Usage for grounded networks (TN) only. With this module the UMC100.3 provides voltage and power based supervision. Available process data: line to line voltage, power, energy, cosphi, THD (total harmonic distortion)
Pas en stock
UMCIO-CAB.030 Connection Cable to connect UMC100.3 to first IO Module, e.g. UMC100.3 to VI150-FBP.0. The cable wires are twisted and unshielded.
Pas en stock
IOIO-CAB.030 Connection Cable to connect one IO Module to one other IO Module, e.g. DX111-FBP.0 to VI150-FBP.0. The cable wires are twisted and unshielded.
Pas en stock
CEM11-FBP.20 Earth Leakage Monitor features a 20 mm diameter through-hole. A threshold can be set, upon violation of this threshold a binary signal is outputted.
Pas en stock
The PDP32.0 communication interface is a PROFIBUS DP (Decentralized Periphery) module and allowes the UMC100.3 to be connected to the PROFIBUS network. It can be mounted directly onto the UMC100.3 or on the SMK3.0 mounting kit.
Pas en stock
The UMCPAN-CAB is a control panel cable and a mounting kit for use in drawer applications. It connects the panel, which is mounted on the drawer front with the UMC100.3 inside of the drawer. This cable is 3m long.
Pas en stock
The UMCPAN-CAB is a control panel cable and a mounting kit for use in drawer applications. It connects the panel, which is mounted on the drawer front with the UMC100.3 inside of the drawer. This cable is 70 cm long.
Pas en stock
Additional terminal blocks for PNQ22 or MTQ22 data connection to UMC100. 4 pieces per package. (spare parts)
Pas en stock
