Contacteurs

The CAF6-02K is an auxiliary contact for front mounting with 2 auxiliary contact and screw terminals.

The CAF6-02M is an auxiliary contact for front mounting with 2 auxiliary contact and screw terminals.

The CAF6-02N is an auxiliary contact for front mounting with 2 auxiliary contact and screw terminals.

The CAF6-11E is an auxiliary contact for front mounting with 2 auxiliary contact and screw terminals.

The CAF6-11K is an auxiliary contact for front mounting with 2 auxiliary contact and screw terminals.

The CAF6-11M is an auxiliary contact for front mounting with 2 auxiliary contact and screw terminals.

The CAF6-11N is an auxiliary contact for front mounting with 2 auxiliary contact and screw terminals.

The CAF6-20E is an auxiliary contact for front mounting with 2 auxiliary contact and screw terminals.

The CAF6-20K is an auxiliary contact for front mounting with 2 auxiliary contact and screw terminals.

The CAF6-20M is an auxiliary contact for front mounting with 2 auxiliary contact and screw terminals.

The CAF6-20N is an auxiliary contact for front mounting with 2 auxiliary contact and screw terminals

2 pole screw type left side mounted auxilliary contact block, instantaneous N.O. and N.C. contacts, suitable for standard industrial environments

The auxiliary contact blocks are used for the operation of auxiliary circuits and control circuits for standard industrial environments.Types of auxiliary contact blocks for front mounting:• CA4 1 or 4-pole block, with instantaneous N.O., N.C. contacts• CC4 1-pole block, with N.O. leading contact or N.C. lagging contact• CAT4 2-pole block, with instantaneous N.O. + N.C. contacts and A1 / A2 coil terminal connection on front face.Select the 4-pole auxiliary contact blocks CA4-..E, CA4-..M, CA4-..U or CA4-..N type, according to the contactor or contactor relay type for compliance with the standard requirements (see "Terminal marking and positioning").Types of auxiliary contact blocks for side mounting:• CAL4 2-pole block, with instantaneous N.O. + N.C. contacts.For clipping onto the right- and/or left-hand side of the contactors. The auxiliary contact blocks are equipped with screw type connecting terminals delivered open, protected against accidental direct contact and bear the corresponding function marking.

The auxiliary contact blocks are used for the operation of auxiliary circuits and control circuits for standard industrial environments.Types of auxiliary contact blocks for front mounting:• CA4 1 or 4-pole block, with instantaneous N.O., N.C. contacts• CC4 1-pole block, with N.O. leading contact or N.C. lagging contact• CAT4 2-pole block, with instantaneous N.O. + N.C. contacts and A1 / A2 coil terminal connection on front face.Select the 4-pole auxiliary contact blocks CA4-..E, CA4-..M, CA4-..U or CA4-..N type, according to the contactor or contactor relay type for compliance with the standard requirements (see "Terminal marking and positioning").Types of auxiliary contact blocks for side mounting:• CAL4 2-pole block, with instantaneous N.O. + N.C. contacts.For clipping onto the right- and/or left-hand side of the contactors. The auxiliary contact blocks are equipped with screw type connecting terminals delivered open, protected against accidental direct contact and bear the corresponding function marking.

CB5 Impulse contact blocks are designed for use in enclosures, in association with an adjustable mechanical pushbutton. Two types are available:• CB5-10: N.O. contact with a black actuator ("ON" function)• CB5-01: N.C. contact with a light grey actuator ("OFF" function).These blocks are equipped with 2 connecting leads 0.5 mm² with end, approximately 18 cm long.Mounting: Clipped onto the front face of the contactors.

CB5 Impulse contact blocks are designed for use in enclosures, in association with an adjustable mechanical pushbutton. Two types are available:• CB5-10: N.O. contact with a black actuator ("ON" function)• CB5-01: N.C. contact with a light grey actuator ("OFF" function).These blocks are equipped with 2 connecting leads 0.5 mm² with end, approximately 18 cm long.Mounting: Clipped onto the front face of the contactors.

The auxiliary contact blocks are used for the operation of auxiliary circuits and control circuits for standard industrial environments.Types of auxiliary contact blocks for front mounting:• CA4 1 or 4-pole block, with instantaneous N.O., N.C. contacts• CC4 1-pole block, with N.O. leading contact or N.C. lagging contact• CAT4 2-pole block, with instantaneous N.O. + N.C. contacts and A1 / A2 coil terminal connection on front face.Select the 4-pole auxiliary contact blocks CA4-..E, CA4-..M, CA4-..U or CA4-..N type, according to the contactor or contactor relay type for compliance with the standard requirements (see "Terminal marking and positioning").Types of auxiliary contact blocks for side mounting:• CAL4 2-pole block, with instantaneous N.O. + N.C. contacts.For clipping onto the right- and/or left-hand side of the contactors. The auxiliary contact blocks are equipped with screw type connecting terminals delivered open, protected against accidental direct contact and bear the corresponding function marking.

CC5-01 Auxiliary Contact Block

CC5-10 Auxiliary Contact Block

CCL16-11E Auxiliary Contact Block, with 1 N.O. and 1 N.C.