Contrôle et protection des moteurs

The CAF6-20K is an auxiliary contact for front mounting with 2 auxiliary contact and screw terminals.

The CAF6-20M is an auxiliary contact for front mounting with 2 auxiliary contact and screw terminals.

The CAF6-20N is an auxiliary contact for front mounting with 2 auxiliary contact and screw terminals

2 pole screw type left side mounted auxilliary contact block, instantaneous N.O. and N.C. contacts, suitable for standard industrial environments

The auxiliary contact blocks are used for the operation of auxiliary circuits and control circuits for standard industrial environments.Types of auxiliary contact blocks for front mounting:• CA4 1 or 4-pole block, with instantaneous N.O., N.C. contacts• CC4 1-pole block, with N.O. leading contact or N.C. lagging contact• CAT4 2-pole block, with instantaneous N.O. + N.C. contacts and A1 / A2 coil terminal connection on front face.Select the 4-pole auxiliary contact blocks CA4-..E, CA4-..M, CA4-..U or CA4-..N type, according to the contactor or contactor relay type for compliance with the standard requirements (see "Terminal marking and positioning").Types of auxiliary contact blocks for side mounting:• CAL4 2-pole block, with instantaneous N.O. + N.C. contacts.For clipping onto the right- and/or left-hand side of the contactors. The auxiliary contact blocks are equipped with screw type connecting terminals delivered open, protected against accidental direct contact and bear the corresponding function marking.

The auxiliary contact blocks are used for the operation of auxiliary circuits and control circuits for standard industrial environments.Types of auxiliary contact blocks for front mounting:• CA4 1 or 4-pole block, with instantaneous N.O., N.C. contacts• CC4 1-pole block, with N.O. leading contact or N.C. lagging contact• CAT4 2-pole block, with instantaneous N.O. + N.C. contacts and A1 / A2 coil terminal connection on front face.Select the 4-pole auxiliary contact blocks CA4-..E, CA4-..M, CA4-..U or CA4-..N type, according to the contactor or contactor relay type for compliance with the standard requirements (see "Terminal marking and positioning").Types of auxiliary contact blocks for side mounting:• CAL4 2-pole block, with instantaneous N.O. + N.C. contacts.For clipping onto the right- and/or left-hand side of the contactors. The auxiliary contact blocks are equipped with screw type connecting terminals delivered open, protected against accidental direct contact and bear the corresponding function marking.

CB5 Impulse contact blocks are designed for use in enclosures, in association with an adjustable mechanical pushbutton. Two types are available:• CB5-10: N.O. contact with a black actuator ("ON" function)• CB5-01: N.C. contact with a light grey actuator ("OFF" function).These blocks are equipped with 2 connecting leads 0.5 mm² with end, approximately 18 cm long.Mounting: Clipped onto the front face of the contactors.

CB5 Impulse contact blocks are designed for use in enclosures, in association with an adjustable mechanical pushbutton. Two types are available:• CB5-10: N.O. contact with a black actuator ("ON" function)• CB5-01: N.C. contact with a light grey actuator ("OFF" function).These blocks are equipped with 2 connecting leads 0.5 mm² with end, approximately 18 cm long.Mounting: Clipped onto the front face of the contactors.

The auxiliary contact blocks are used for the operation of auxiliary circuits and control circuits for standard industrial environments.Types of auxiliary contact blocks for front mounting:• CA4 1 or 4-pole block, with instantaneous N.O., N.C. contacts• CC4 1-pole block, with N.O. leading contact or N.C. lagging contact• CAT4 2-pole block, with instantaneous N.O. + N.C. contacts and A1 / A2 coil terminal connection on front face.Select the 4-pole auxiliary contact blocks CA4-..E, CA4-..M, CA4-..U or CA4-..N type, according to the contactor or contactor relay type for compliance with the standard requirements (see "Terminal marking and positioning").Types of auxiliary contact blocks for side mounting:• CAL4 2-pole block, with instantaneous N.O. + N.C. contacts.For clipping onto the right- and/or left-hand side of the contactors. The auxiliary contact blocks are equipped with screw type connecting terminals delivered open, protected against accidental direct contact and bear the corresponding function marking.

CC5-01 Auxiliary Contact Block

CC5-10 Auxiliary Contact Block

CCL16-11E Auxiliary Contact Block, with 1 N.O. and 1 N.C.

CCL5-11 Auxiliary Contact Block

CE5 auxiliary contact blocks are used for the operation of auxiliary circuits and control circuits forsevere industrial environments.Types of auxiliary contact blocks for front mounting:• CE5 1-pole block, instantaneous with N.O. contact or N.C. contact, available in 2 IP degrees-- CE5 D with built-in microswitch IP40, degree of protection (IP20 on terminals)-- CE5 W with built-in microswitch IP67, degree of protection (IP20 on terminals).The auxiliary contact blocks are equipped with screw type connecting terminals delivered open,protected against accidental direct contact and bear the corresponding function marking.

The DB16E single mounting kit allows the installation of E16DU electronic overload relays without a contactor on a DIN rail or mounting plate.

DB25/32A Single monting kit for TA25DU

DB80 Single mounting kit

DR25-A-110 Remote reset coil 110V, 50/60Hz

DR25-A-500 Remote reset coil 500V, 50/60Hz

The EF205-210 is an self-supplied electronic overload relay, which means no extra external supply is needed. It offers reliable and fast protection for motors in the event of overload or phase failure. Easy to use like a thermal overload relay and compatible with standard motor applications, the electronic overload relay is convincing, above all, due to its wide setting range, high accuracy, high operational temperature range and the possibility to select a trip class (10E, 20E, 30E). Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP- and Test function and a trip indication. The overload relays are connected directly to the contactors. EF205 has ATEX and IECEx certification 1)1) ATEX is valid for products produced from week 42, 2014.IECEx is valid for products produced from week 15, 2017.