Moteurs et Variateurs de fréquences

Passerelle destinée à la connexion via EtherNet/IP™ de jusqu'à 32 périphériques système Interface à un automate de niveau supérieur. Les périphériques système Interface sont reliés à la passerelle au moyen du connecteur de bus sur rail DIN fourni.

1.65 in. (42mm) 2-Phase Bipolar Stepper Motor

1.65 in. (42mm) 2-Phase Bipolar Stepper Motor

30 W (1/25 HP) Brushless DC Motor (100:1 Gear Ratio)

The softstarter PSR16-600-11 has a rated maximum operational current of 16 A with an operating voltage span from 208...600 V AC. The rated control voltage is 24 V AC/DC. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

LV AC Packaged drive with disconnect and fuses, UL: Pld 3 Hp, 4.8 A, 460 V (ACQ580-PD-04A8-4)

Reversible Motor

GFS Gearhead Parallel Shaft (30:1)

25 m Length High-Flexible Motor Power Cable

The softstarter PSR9-600-11 has a rated maximum operational current of 9 A with an operating voltage span from 208...600 V AC. The rated control voltage is 24 V AC/DC. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

ACS180 variateur Std avec STO et CEM R0 480V 3 PH 1 HP 2.5 A

90 W (1/8 HP) Induction Gear Motor (150:1 Gear Ratio, Single-Phase 220/230 VAC)

Metal Connection Cable (B Type - Opposite Shaft Outlet), 7 m

Connection Cable (10.3 m)

LV AC wall-mounted drive for water and wastewater, UL: Pld 10 Hp, 14 A, 460 V (ACQ580-01-014A-4)

Flexible Connection Cable Set (16.4 ft. [5 m])

3.35 in. (85mm) 2-Phase Bipolar Stepper Motor

90 W (1/8 HP) AC Speed Control Motor (25:1 Gear Ratio) (Single-Phase 220/230 VAC)

Connecteur d'alimentation 1S

FIO-11, Analogue i/o extention