Moteurs et Variateurs de fréquences

90 W (1/8 HP) Induction Gear Motor (150:1 Gear Ratio, Single-Phase 110/115 VAC)

Série G5 Servo Drive EtherCAT d'une capacité de 200 W

10 m Cable Length Robotic Encoder Cable

GVR Series Parallel Shaft Gearhead (7.5:1 Gear Ratio, Stainless Steel Shaft)

FIO-01, digital i/o extension

Induction Motor

"ACS255, 3-Phase 480 V, IP66 + Switch"

10 m Cable Length Robotic Encoder Cable

The softstarter PSR25-600-11 has a rated maximum operational current of 25 A with an operating voltage span from 208...600 V AC. The rated control voltage is 24 V AC/DC. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

90 W (1/8 HP) Washdown Gear Motor (9:1 Gear Ratio) (Three-Phase 200/220/230 VAC)

Brushless DC Motor Driver

BH Gearhead Right-Angle Hollow Shaft (9:1)

Reversible Motor

Flexible Coupling (8 mm to 3/8 in.)

The softstarter PSR6-600-11 has a rated maximum operational current of 6 A with an operating voltage span from 208...600 V AC. The rated control voltage is 24 V AC/DC. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

Motor Connection/Extension Cable [16.4 ft. (5 m)]

1SA Cable 5m

PCS 3-WIRE SOFTSTARTER, 20

Entraînement à courant alternatif de 3,4 A et à couple variable de 2 hp

400 W (1/2 HP) Brushless DC Motor