Moteurs et Variateurs de fréquences

Servomoteur rotatif de la série 1S d'une capacité de 3 kW

ACS550-U1-02A7-6,2HP/2.7AMPS,2HP,,IP21-NEMA1,R2,48-63Hz,Dir Connect,Bot/Side Conduit

Câble d'alimentation du moteur très flexible de 30 m de long

25 W (1/30 HP) Washdown Gear Motor (3.6:1 Gear Ratio) (Single-Phase 110/115 VAC)

3kW 200VAC 1SA Drive E-CAT

Série 1S Servomoteur rotatif d'une capacité de 1 kW

1S AC servo motor, 5.5 kW, 400 VAC, 1500 rpm, 35.0 Nm, absolute encoder

The softstarter PSR105-600-70 has a rated maximum operational current of 105 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

Motor Cable (3.3 ft. [1m])

Servomoteur rotatif de la série G5 d'une capacité de 1 kW

ABB, ACS8800109A97+0000, Drive

400 W (1/2 HP) Brushless DC Motor

Electromagnetic Brake Induction Motor

90 W (1/8 HP) Induction Motor (Single-Phase 110/115 VAC)

Entraînement à courant alternatif de 7,2 A et à couple variable de 5 hp

The softstarter PSE142-600-70 has a rated maximum operational current of 142 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter. It’s a perfect balance be­tween high starting capacity and cost effi­ciency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

Brushless DC Motor Driver (Single-Phase, Three-Phase 200-240 VAC)

Brushless DC Motor Driver (Single-Phase, Three-Phase 200-240 VAC)

ACS580 240V 1HPld/0.75HPhd; Nema 1

200 W (1/4 HP) Brushless DC Motor Speed Control System (50:1 Gear Ratio) (Single-Phase 100-120 VAC)