Moteurs et Variateurs de fréquences

ABB, ACS88001027A7+0000, DRIVE ABB

ACS880-01-24A3-2 Pcont.max:5,5kW, Icont.max:23,1A

30 m Cable Length High-Flex Encoder Cable

Câble d'alimentation/frein haute flexibilité de 20 m de long

200 W (1/4 HP) Brushless DC Motor

"15kW, 240V 1S-Series Srv Drv"

60 W (1/12 HP) Washdown Gear Motor (25:1 Gear Ratio) (Single-Phase 110/115 VAC)

ACS180 variateur Std avec STO et CEM R1 230V 3 PH 2 HP 7.4 A

120 W (1/6 HP) Brushless DC Motor

ACS880 480V 40HPld/30HPhd +N5700 code

AR Series Driver (24/48 VDC)

Servomoteur rotatif de la série G5 d'une capacité de 400 W

Reversible Motor

Induction Motor

2.6kW 200VAC 3000RPM 1SA Mtr

Servomoteur rotatif de la série 1S d'une capacité de 2 kW

Série 1S Servomoteur rotatif d'une capacité de 200 W

1S AC servo motor, 4 kW, 400 VAC, 3000 rpm, 12.7 Nm, absolute encoder, with brake

The softstarter PSE210-600-70-1 has a rated maximum operational current of 210 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter. It’s a perfect balance be­tween high starting capacity and cost effi­ciency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

90 W (1/8 HP) AC Speed Control Motor (100:1 Gear Ratio) (Single-Phase 220/230 VAC)