Produits de surveillance

The CM-MPN.62S is a multifunctional relay from the CM three-phase monitors range. It operates with a rated control supply voltage / three-phase measuring voltage of 450-720 V AC 50/60 Hz and has a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A. This relay monitors all phase parameters such as over/undervoltage, phase unbalance and phase failure. The corresponding threshold values are adjustable. The CM-MPN.62S also offers selection of phase sequence monitoring, automatic phase sequence correction as well as an ON or OFF tripping delay. The output contacts can be configured as 1x2 c/o (SPDT) contacts (common signal) or 2x1 c/o (SPDT) contact (separate signal for over- and undervoltage thresholds) operation. The tripping delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.

Passerelle industrielle VPN vers mGuard Secure Cloud, communication IPsec via le réseau de l'opérateur, 1 port WAN, 1 port LAN, fonction de routage, 1 entrée TOR, 1 sortie TOR

The CM-SRS.M2S is a multifunctional current monitoring relay from the CM single-phase monitors range. This monitoring relay operates with a rated control supply voltage of 24 - 240 V AC / DC and has a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A. It provides a RMS measuring principle for DC and AC currents with 3 measuring ranges: 0.3-1.5 A, 1-5 A and 3-15 A. The CM-SRS.M2S offers selection of over- or undercurrent monitoring, open- or closed-circuit operating principle, with or without latching function. The hysteresis is adjustable within a range of 3 to 30 % of the threshold value. The tripping delay and the start-up delay are adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.

K8AK-TH11S 100-240VAC, Relais de surveillance de température TC/RTD

Relais de surveillance pour le contrôle de la séquence de phase, de la défaillance de phase et de l'asymétrie à 208 V AC ... 690 V AC de tensions triphasées, 2 contacts inverseurs, avec raccordement vissé

K8AK-VW3 Relais 24VAC/DC, UndrOvr Volt 20 à 600 V

Routeur 4G LTE industriel, version pour AT&T (États-Unis), repli sur réseau 3G UMTS/HSPA, 2 ports Ethernet, pare-feu, compatibilité NAT, IPsec et OpenVPN, 2 x prises d'antenne SMA-F, envoi de SMS et d'e-mail, 2 entrées TOR, 1 sortie TOR

Dispositif de sécurité, version pour AT&T (US), interface téléphonie mobile 4G, emplacement carte SD, 2 tunnels VPN, pare-feu pour une configuration simple, routeur avec NAT/NAT 1:1, switch 4 ports

Monitoring relay 22.5 mm wide, 3-phase voltage monitoring, over and under voltages, 3-wire mode: 380, 400, 415 and 480 VAC, 4-wire mode: 220, 230, 240 and 277 VAC, two SPDT

Licence pour le Client VPN mGuard Secure v11.x

Relais de surveillance pour le contrôle des tensions monophasées de 0 à 300 V AC/DC, surtension/sous-tension ou fenêtre, mémoire d'erreur, alimentation acceptant une large gamme de tensions d'entrée, 2 inverseurs

Relais de surveillance pour tensions triphasées de 400 V AC ±30 %, fenêtre ou fenêtre avec ordre des phases, 1 contact inverseur, avec raccordement Push-in

Relais de surveillance pour l'ordre des phases et l'asymétrie à 208...480 V AC / 120...277 V AC des tensions triphasées, asymétrie configurable, 1 contact inverseur, avec raccordement Push-in

Relais de surveillance pour le contrôle des courants monophasés de 0 à 10 A AC/DC, surintensité/sous-intensité ou fenêtre, mémoire d'erreur, alimentation acceptant une large gamme de tensions d'entrée, 2 inverseurs

K8AK-VS2 24VAC/DC, Relais de tension 1 à 150 V

Deuxième génération : dispositif d'extension d'Ethernet administrable, pour connexions point-à-point, structures linéaires et en anneau, débits de données jusqu'à 30 MBit/s, distances jusqu'à 20 km sur des câbles en cuivre opérationnels, diagnostic via USB et LED, 2 ports SHDSL, 1 port LAN

The CM-ENS.23S belongs to the CM liquid level monitoring relay range. It operates with a rated control supply voltage of 110-130 V AC and 220-240 V AC and has a 1 c/o (SPDT) output with contacts rated at 250 V / 4 A. It monitors liquid levels of conductive fluids and protects pumps against dry running or tanks against overflow. The working principle as well as the sensitivity can be selected via front-face potentiometers. Several electrodes and a sealable transparent cover for protection against unauthorized changes are available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.

The CM-MPN.52S is a multifunctional relay from the CM three-phase monitors range. It operates with a rated control supply voltage / three-phase measuring voltage of 350-580 V AC 50/60 Hz and has a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A. This relay monitors all phase parameters such as over/undervoltage, phase unbalance and phase failure. The corresponding threshold values are adjustable. The CM-MPN.52S also offers selection of phase sequence monitoring, automatic phase sequence correction as well as an ON or OFF tripping delay. The output contacts can be configured as 1x2 c/o (SPDT) contacts (common signal) or 2x1 c/o (SPDT) contact (separate signal for over- and undervoltage thresholds) operation. The tripping delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.

100 à 240 V CA Tension d'alimentation Courant monophasé Relais

The CM-PVS.81S relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 200-400 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PVS.81S monitors the phase parameters over/undervoltage and phase failure. The corresponding threshold values are adjustable. Phase sequence monitoring as well as an ON or OFF tripping delay are selectable. The tripping delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.