Mesure et surveillance

Connecteur pour compensation de soudure froide pour thermocouples, permet une commutation sécurisée de valeurs seuil, à combiner avec le convertisseur de température MACX ...-T-UI...

Routeur 4G LTE industriel, appareil de l'UE, procédure de repli 3G (UMTS/HSPA) et 2G (GPRS/EDGE), point d'accès WLAN 802.11a/b/g/n 150 Mbit/s 2,4 GHz + 5 GHz, switch à 2 ports, pare-feu, NAT, compatibilité IPsec et OpenVPN, 2 DI, 1 DO, RS-232/RS-485

Câble VIP 16 canaux pour utilisation avec le contrôleur universel d'E/S Honeywell C300, AWG 22, longueur 3 m

Convertisseur de courant MCR, programmable et configurable, pour mesurer des courants continus, alternatifs ou déformés, intensité d'entrée de 0...20 à 0...100 A, non configuré

The MAR.01 marker label is a spare part. The marker label is suitable for devices with S and N housings without front-face DIP switches.

Dipped electrode for eveluating liquid levels

The COV.01 sealable transparent cover is an accessory. The cover can be used for protection against unauthorized changes. It fits to all S housings.

The ADP.01 adapter for screw mounting is an accessory. The adapter allows the screw mounting of a S housing on panel or wall.

The ADP.02 adapter for screw mounting is an accessory. The adapter allows the screw mounting of a N housing on panel or wall.

Screw-in bar electrode for compact support CM-KH-3, length = 300 mm

Screw-in bar electrode for compact support CM-KH-3, length = 600 mm

Screw-in bar electrode for compact support CM-KH-3, length = 1000 mm

Compact support CM-KH-3 for screw in bar electrodes with M4 winding

Distance plate CM-AH-3 for screwed in bar electrodes in compact support Cm-KH.-3

Counternut CM-GM-1 for compact support CM-KH-3

The CM-CT 200/5 is a plug-in current transformer from the CM-CT range. The current transformer has a rated primary current of 200 A and a secondary rated current of 5 A. The burden of the current transformer is 5 VA and its precision is according to class 1. The CM-CT 200/5 will be delivered with foot angle, insulating protective cap and bar fastening screws. A snap-on mounting for DIN rail is avaiable as accessory.

The CM-ENE MIN belongs to the CM liquid level monitoring relay range. It operates with a rated control supply voltage of 110-130 V AC and has a 1 n/o output contact. It protects pumps against dry running. The output relay works according to the open-circuit principle. The sensitivity is 0-100 kOhm fixed. The device offers screw connection terminals.

The CM-ENE MIN belongs to the CM liquid level monitoring relay range. It operates with a rated control supply voltage of 220-240 V AC and has a 1 n/o output contact. It protects pumps against dry running. The output relay works according to the open-circuit principle. The sensitivity is 0-100 kOhm fixed. The device offers screw connection terminals.

The CM-ENE MIN belongs to the CM liquid level monitoring relay range. It operates with a rated control supply voltage of 24 V AC and has a 1 n/o output contact. It protects pumps against dry running. The output relay works according to the open-circuit principle. The sensitivity is 0-100 kOhm fixed. The device offers screw connection terminals.

The CM-PBE relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 380-440 V AC and has a 1 n/o output (closed circuit principle) with contacts rated at 250 V / 4 A. The CM-PBE monitors the phase loss and undervoltage. The corresponding threshold values are fixed. The relay is suitable for monitoring of three phase mains.