ABB Boutons poussoirs de sécurité

Emergency stop button in Smile enclosure, 2 x NC, Status LED in button, 1 x M12-5 male connector.

Emergency stop button in Smile enclosure, Tina adaptation unit to DYNlink included, Status LED in button, 1 x M12-5 male connector.

Emergency stop button for panel mounting, 22.5 mm holes, 2 NC contacts, status LED in button, terminal blocks.

20m Galvanized wire pull kit. Includes 20m Wire (One end is terminated with thimble and permanent clamp), 9 pcs Eyebolts, 1 pcs Tensioner, 1 pcs Allen Key, 1 pcs QuickLink.

Wire Tensioner/Gripper for Emergency Pull Wire Switch systems, Stainless Steel.

Emergency stop, 2NC+2NO, stainless steel 316 body, LED status indication, Conduit entry 3xM20

Reset button in Smile enclosure, 1 x NO button, 1 x Blue LED, 1 x M12-5 male connector.

Spare part LED for LineStrong and EStrong. Steady Green/Steady Red 24VDC

50m Stainless steel wire pull kit. Includes 50m Wire (One end is terminated with thimble and permanent clamp), 20 pcs Eyebolts, 1 pcs Tensioner, 1 pcs Allen Key, 1 pcs QuickLink.

Emergency stop button in Smile enclosure, Tina adaptation unit to DYNlink included, Status LED in button, 1 x M12-5 male connector, reversed button attachement (from bottom).

Emergency stop button for panel mounting, 22.5 mm holes, Tina adaptation to DYNlink and StatusBus functionality, Indication LED in button, detachable terminal blocks.

Spring for Emergency Pull Wire Switch systems, 220mm, Stainless Steel. When using one Emergency pull wire switch the wire should be anchored at the other end using this Spring.

Emergency stop button in Smile enclosure, 2 x NC, Status LED in button, 1 meter cable 5 leads out of bottom.

Wire Tensioner/Gripper for Emergency Pull Wire Switch systems, Galvanized.

10m Galvanized wire pull kit. Includes 10m Wire (One end is terminated with thimble and permanent clamp), 5 pcs Eyebolts, 1 pcs Tensioner, 1 pcs Allen Key, 1 pcs QuickLink.

2TLA030054R0900, Emergency Stop Sign Yellow surround for panel mounted emergency stop button, for 22.5 mm hole.

Reset light button in Smile enclosure for connection to Orion1 Base using M12-3R or Tina 10B (M12-CTO1BM necessary). One M12-5 male connector.

Reset light button in Smile enclosure for connection to Orion2 Base, Orion2 Extended and Orion3 Extended using M12-3R or Tina 10B. One M12-5 male connector.

Reset light button in Smile enclosure for connection to Orion3 Base using M12-3R or Tina 10B (M12-CTO3B necessary). One M12-5 male connector.

Emergency stop in Smile enclosure, Tina adaptation unit included for dynamic ciruit with StatusBus functionality, Status LED in button, 1 x M12-5 male connector.