Composants de sécurité des machines

Câble d'extension de l'émetteur de 20 m de long

Pluto is a cost effective, powerful and compact safety PLC for all machine safety applications. Most safety devices on the market can be connected directly to Pluto and multiple safety sensors can be connected to a single input and still achieve the highest safety level. Programming is done easily in the accompanying software Pluto Manager.Safety PLC with Pluto safety bus. Totally 20 I/O: 8 failsafe inputs + 8 non-failsafe outputs/failsafe inputs + 2 individually failsafe relay outputs + 2 individually failsafe transistor outputs. Current monitoring on Q16 + Q17. NOTE: Version 2 hardware/processor.

Stainless Steel Case Material Rope Pull Emergency Stop Switch

1001 à 1500 mm de longueur Couvercle de protection contre les éclaboussures

Safety Light Curtain, F3SG-SRB Standard, Type 4, 14 mm resolution, range 0.3 to 10.0 m, height 560 mm, PNP/NPN

Câble d'extension du récepteur d'une longueur de 3 m

2048 kB Capacité du programme Sécurité Unité centrale de traitement (CPU)

560 mm Hauteur protégée Barrière immatérielle

Câble d'extension du récepteur d'une longueur de 20 m

Mirror column 1310 mm for multibeam safety sensor F3SG-PG_A/L (3 beams)

Wire Tensioner/Gripper for Emergency Pull Wire Switch systems, Stainless Steel.

Lampe à inhibition

Rope pull emergency stop switch, up to 40m, 2 NC + 1NO, M20 wiring entry (3x)

Paire de câbles en cascade, 12 cm, pour émetteur et récepteur

Safety Light Curtain, F3SG-SRB Standard, Type 4, 25 mm resolution, range 0.3 to 20.0 m, height 200 mm, PNP/NPN

Emergency stop, 2NC+2NO, stainless steel 316 body, LED status indication, Conduit entry 3xM20

TIna 10C v2 adapts the OSSD outputs of ABB optical safety devices to the DYNlink solution with possibility to power the transmitter. Tina 10C has one M12-5 male connector towards the DYNlink loop, one M12-8 female connector towards the OSSD device and one M12-5 female connector for the supply of the transmitter (0V and +24VDC).The Tina devices adapt the DYNlink safety circuit in Vital, Pluto and B&R X20 to safety components with mechanical contacts, such as E-stops, switches and light beams/curtains with dual outputs.Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.

Connecteur en Y pour F3SG-RA

Diamètre de tête de 40 mm et éclairage non lumineux Interrupteur d'arrêt d'urgence

Reset button in Smile enclosure, 1 x NO button, 1 x Blue LED, 1 x M12-5 male connector.