Composants de sécurité des machines

Tina 8A is a connection block for series connection of up to eight DYNlink devices. Eight M12-5 female connectors for the sensors are available on the device. The information signal of each device can be wired separately. The cable used for the connection to the Tina 8A should have a diameter 7 - 12 mm. Unused M12-connectors on Tina 8A must be equipped with Tina 1A blind plugs.The Tina devices adapt the DYNlink safety circuit in Vital, Pluto and B&R X20 to safety components with mechanical contacts, such as E-stops, switches and light beams/curtains with dual outputs.Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.

20m Galvanized wire pull kit. Includes 20m Wire (One end is terminated with thimble and permanent clamp), 9 pcs Eyebolts, 1 pcs Tensioner, 1 pcs Allen Key, 1 pcs QuickLink.

1220 mm Hauteur protégée Barrière immatérielle cascadable de type avancé

Diamètre de la tête 40 mm et éclairage lumineux Interrupteur d'arrêt d'urgence

Couvercle de protection pour la fenêtre

Safety Multi-Light Beam, F3SG-PG Perimeter Guarding, Type 4, 4 beams, range 0.5 to 70 m, product length 1070 mm, Active/active

240 mm Hauteur protégée Barrière immatérielle cascadable de type avancé

960 mm Hauteur protégée Barrière immatérielle

Corde de 20 m de long et 9 œillets Kit de corde

Safety Light Curtain, F3SG-SRB Standard, Type 4, 25 mm resolution, range 0.3 to 20.0 m, height 1280 mm, PNP/NPN

Mount-column adjustable base for F3SG-SR/PG Mounted to the floor mount column or mirror column.The angle and height of the column can be adjusted.

945 mm Hauteur protégée Easy Type Light Curtain

1220 mm Hauteur protégée Barrière immatérielle cascadable de type avancé

2TLA020054R1800, Tina 12A Connection block with adaption unit for dynamic circuits. Two M12 8-pole connectors for sensor input. For example Dalton and Magne locks.

1790 mm Hauteur protégée Barrière immatérielle

M12-C203 is a shielded cable with a straight M12-8 female connector and a free end. The eight conductors have a cross section of 0.34 mm2. The jacket is made of black PVC. The length of the cable is 20 meters.

M12-3A is a M12 Y-connector for series connection of DYNlink devices such as Eden sensors, Smile Tina and Inca Tina emergency stop buttons, and Tina adapters. Connector #2 is a M12-5 female connector for connection of the safety device, connector #1 ia a M12-5 male connector for connection of +24VDC, 0V and the incoming DYNlink signal and connector #3 is a M12-5 female connector for continuation of the circuit towards another DYNlink safety device or safety controller/PLC.

670 mm Hauteur protégée Barrière immatérielle

455 mm Hauteur protégée Barrière immatérielle cascadable de type avancé

Tina 7A is used for adaptation of devices with two positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 7A is mounted on a DIN rail in the electrical cabinets and the connected safety device(s) must be mounted on the same cabinet, e.g. an emergency-stop button mounted on the cabinet. Electrical connection is made via detachable terminal blocks.