Composants de sécurité des machines

Câble d'extension du récepteur d'une longueur de 15 m

30 mm Largeur de l'unité d'entrée de sécurité

Spring for Emergency Pull Wire Switch systems, 220mm, Stainless Steel. When using one Emergency pull wire switch the wire should be anchored at the other end using this Spring.

Tina 2A is used for adaptation of devices with two positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 2A is mounted directly on the device enclosure to a M20 cable entry.Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.

Câble Root-Plug pour récepteur, 8P 10m ouvert, BLK

Câble Root-Plug pour émetteur, 5P 10m ouvert, GRY

Terminating resistor for Pluto safety bus. Delivered with each Pluto. Necessary for each stand-alone Pluto and on the Pluto units at each end of the Pluto safety bus. Should be removed from the other Pluto units.

Boîte de robinet à branche unique

Câble d'extension du récepteur d'une longueur de 1 m

M12-C0312 is a shielded cable with straight M12-5 male and female connectors. The five conductors have a cross section of 0.34 mm2. The shield is connected to pin 3 (0V) on the male connector. The jacket is made of black PVC. The length of the cable is 0.3 meter.

Emergency stop button in Smile enclosure, 2 x NC, Status LED in button, 1 meter cable 5 leads out of bottom.

Y-cable with one straight M12-8 female connector (#1), one straight M12-8 male connector (#2) and one straight M12-5 male connector (#3).

M12-C101V2 Cable

40 mm Diamètre de la tête Interrupteur

Câble d'extension du récepteur d'une longueur de 0,5 m

Connection box for two or four muting sensors. Connection to Orion1 Extended using M12-C02PT62RM and to Orion2 Extended and Orion3 Extended using M12-CYMUTE. Four M12-5 female connectors for muting sensors (A1, A2, B1, B2).

Pluto cable, HMI-panel ABB CP600 to Pluto programming port.

Wire Tensioner/Gripper for Emergency Pull Wire Switch systems, Galvanized.

Safety sensor accessory, F3SG-R Advanced, emitter extension cable M12 5-pin, male/female, 1 m

Câble d'extension de l'émetteur de 0,5 m de long