Marques populaires dans { name }

Achetez { name } chez Proax, distributeur d'automatisation top au Canada. Ramassage facile, expédition rapide.

Magasinez { name } en ligne

- Vous avez peut-être tapé le mauvais terme de recherche, par exemple un nom de produit mal orthographié ou des caractères/symboles spéciaux.
- Il se peut que nous n'ayons pas le produit que vous recherchez

Essayez d'affiner votre recherche en n'utilisant pas de caractères spéciaux.

**Ce n'est pas le cas ? N'hésitez pas à nous contacter et nous vous aiderons le plus rapidement possible.**

Recherche

Conformance

CE-compliant

Connection Method

RJ45 jack, shielded

Plug-in screw terminal block (COMBICON), redundancy possible

SC duplex

SC simplex

B-FOC (ST®)

LC duplex

Plug-in/screw connection via COMBICON

SC-RJ

Degree of Protection

IP20

Electrical isolation

VCC // FE // Ethernet

according to IEEE 802.3

VCC // Ethernet

Electromagnetic compatibility

Conformance with EMC Directive 2014/30/EU

Identification

ISA-S71.04-1985 G3 Harsh Group A

DNV GL

 II 3 G Ex nA IIC T4 Gc X

508 Listed

Class I, Zone 2, AEx nA IIC T4

Class I, Zone 2, Ex nA IIC T4 Gc X

Class I, Div. 2, Groups A, B, C, D

 II (2) D [Ex op is Db] IIIC

 II (2) G [Ex op is Gb] IIC

Mounting Type

DIN rail mounting

DIN rail: 35 mm

MTTF

1400 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)

599 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)

101 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)

77.82 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)

95.85 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)

79.3 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)

929 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)

461 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)

204 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)

95.3 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)

79.22 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)

Standards/regulations

EN 61000-4-6

EN 61000-4-5

EN 61000-4-4

EN 61000-4-3

EN 61000-4-2

EN 55032

EN 61000-6-4

Supply Voltage Range

12 V DC ... 48 V DC

18 V DC ... 30 V DC (Screw connection)

18 V DC ... 30 V DC (as an alternative or redundant, via backplane bus contact and system current supply)

12 V DC ... 57 V DC

18 V DC ... 32 V DC (via pluggable COMBICON screw terminal block)

18 V DC ... 32 V DC (as an alternative or redundant, via backplane bus contact and system current supply)

Test voltage data interface/power supply

1500 V AC (500 V AC, 1 minute)

0.5 kVrms (50 Hz, 1 min.)

1.5 kVrms (50 Hz, 1 min.)

1500 V

Transmission length incl. 3 dB system reserve

5.3 km (fiberglass with F-G 50/125 1.6 dB/km F800)

9.6 km (fiberglass with F-G 50/125 0.7 dB/km F1200)

3.3 km (fiberglass with F-G 62.5/125 2.6 dB/km F600)

8 km (fiberglass with F-G 62.5/125 0.7 dB/km F1000)

9 km (F-G 50/125 1.6 dB/km F 800)

21 km (F-G 50/125 0.7 dB/km F 1200)

5.5 km (F-G 62.5/125 2.6 dB/km F 600)

21 km (F-G 62.5/125 0.7 dB/km F 1000)

28 km (F-E 9/125 0.5 dB/km)

34 km (F-E 9/125 0.4 dB/km)

38 km (F-E 9/125 0.36 dB/km)

6.4 km (F-G 50/125 0.7 dB/km F 1000)

2.8 km (F-G 50/125 1.6 dB/km F 800)

10 km (F-G 62.5/125 0.7 dB/km F 1000)

3 km (F-G 62.5/125 2.6 dB/km F 600)

29 km (fiberglass with F-G 9/125 0.5 dB/km)

36 km (fiberglass with F-G 9/125 0.4 dB/km)

40 km (fiberglass with F-G 9/125 0.36 dB/km)

26 km (F-E 9/125 0.5 dB/km)

Transmission medium

Copper

Multi-mode fiberglass

Single-mode fiberglass

GI-HCS fiber

Polymer fiber

PCF fiber

UL, USA / Canada

Wavelength

1310 nm

1300 nm

1550 nm (Receiving)

1310 nm (Send)

1310 nm (Receiving)

1550 nm (Send)

1550 nm

660 nm

Phoenix Contact

Advantech

IMC-574I-SFP-A

IMC-350I-MM-A

IMC-350I-SSR-A

IMC-350I-SST-A

IMC-350I-M8ST-A

IMC-762-SFP

iMcV-FiberLinX-II, TX/SFP (1 SFP/155-ED MODULE)

IMC-371-SM-PS

MINIMC-GIGABIT,TX/LX-SM1310 -SC (W/AC ADAPTER)

With 5 USB 2.0 ports, USB-4620 enhances its isolation protection to 3,000 VDC for each downstream port, making every USB device connected with USB-4620 could operate independently and safely. Designed for industrial applications, USB-4620 is able to be mounted through several types, such as DIN-rail mounting, wall mount, and VESA mount. Other than that, USB-4620 is equipped with lockable USB connectors and screw holes, allowing each device to be connected firmly with USB-4620. Though the standard USB cable is made for easy plugging and removing, it is critical to have reliable connections while operating for automation control and online production applications.<h4>Features</h4><ul><li>5 downstream USB 2.0 ports</li><li>Compatible with USB 2.0 Full-speed</li><li>3,000 VDC voltage isolation for each downstream port</li><li>Suitable for DIN-rail mounting</li><li>One lockable USB cable included</li><li>10 ~ 30 VDC power input (power adapter not included*)</li></ul>

USB-4620-AE

IMC-318I-US

USB-4702-AE

10kS/s, 12-bit, Multi-function USB Module

The IMC-574I is a value-based, managed Gigabit Ethernet solution that is ideal for use in a fiber infrastructure. The IMC-574I comes with two SFP ports and two fixed 10/100/1000Base-T copper ports. There are four distinct DIP switch selectable configurations to feature the IMC-574I to be a 1 plus 1 uplink port revertive mode, a 1 plus 1 uplink protection non-revertive mode, a 4-port Gigabit switch, and a dual copper to fiber SFP media/mode converter (two Gigabit fiber media converters in one)

The term "1 plus 1" refers to line protection where identical information is transmitted on two lines. The  receiver chooses its communication line based on the revertive or non-revertive configuration. When a fault is detected on the active line, the traffic is switched to the redundant line. In the non-revertive mode, data is not resumed back to the original line unless the backup line fails or is disconnected. Once the original line is no longer in a fault condition, data can be resumed back to the original line.<h4>Features</h4><ul><li>Versatile 4-port media converter</li><li>Supports SNMP for management</li><li>Supports a variety of SFP modules</li><li>Works under an extended temperature range</li><li>Supports OAM, VLAN, 1+1 revertive</li><li>Provides RS-232 CLI (command line interface) console port</li></ul>

IMC-574I-SFP-PS

IMC-370I-SFP-B

The IMC-71x series provides conversion of Ethernet-to-fiber and a variety of networking technologies. It enables network operators to drastically reduce the capital and operational expenses bu providing all copper-to-fiber and multi-mode to single-mode conversions and network distance extensions. This modular approach allows network operators to inexpensively change protocols by simply changing the module rather than the entire unit. With AC or DC powering options, it is a economic way to overcome a variety of media and mode conversion challenges.

The IMC-713/716/719 series have the highest port density in the industry-- along with a robust design, hot-swappable architecture, SNMP management via iView2, and redundant power supplies for fault tolerance which diverse applications, using a variety of protocols, is required. The temperature controlled fans in the IMC-713/716 chassis activate only when chassis reaches a certain temperature, thereby extending the life of the fans. The fans on the IMC-719 series can even be remotely controlled via SNMP.<h4>Features</h4><ul><li> Designed for a variety of media and mode conversion modules</li><li>Supports a wide range of protocols and future-proof upgrade paths</li><li>High flexibility for module combinations for different environments</li><li>Standard and extended temperature models available</li><li>Provides 3/6/20-slot chassis that supports low to high density deployment</li><li>Supports SNMP management that uses optional SNMP management modulefor 3/6/20-slot chassis</li></ul>

IMC-716-2AC-US

The IMC-771/771 series are slide-in module Ethernet-to-fiber media converter for IMC-7xx chassis, which supports hot-swappable and easy installation, It allows network operators to incorporate multiple fiber types and wavelengths within a network. The IMC-770/771 can be monitored and controlled via central site with IMC-710 SNMP management module by iView2, Telnet or CLI while installed in IMC-71x series chassis.

Offering a range of speed up to Gigabit Ethernet and available with SFP or build-in fiber connector: multi-mode, single-mode fiber or double fiber capacity with single-strand which supports the transmission distance from 550m to 70km. The IMC-770/771 series feature in the Link Fault Pass Through (LFPT) functionality, a diagnostic feature that can enable or disable links to assist the end user in troubleshooting a failed segment and configuration control to retain the latest configuration regardless of how the initial configuration was setup.

The IMC-770I-2SFP converter is protocol-independent with dial SFP ports which can provide a single conversion between different wavelengths or single-mode and multi-mode fiber, single-mode to single-mode fiber or multi-mode to single-strand fiber. Its SFP port must use an SFP of the same speed while allowing different fiber types. Additionally, the IMC-770I-2SFP and IMC-771I-SFP are industrial equipment devices. The unit operates in environments that demand extended operating temperatures.<h4>Features</h4><ul><li>Variety of choices: multi-mode, single-mode or single-strand including SFP form factor</li><li>The modular, hot-swappable architecture reduces operational costs associated with product installation, upgrades, and maintenance</li><li>SNMP manageable</li><li>Supports configuration control</li><li>Supports Link Fault Pass Through (LFPT)</li></ul>

IMC-770-SFP

<h3>FL MC 2000E SM40 LC - Convertisseurs fibre optique</h3><p>Convertisseur fibre optique avec raccordement FO LC-Duplex (1300 nm), pour la conversion de 100BASE-TX en fibre de verre monomode. Fonction Auto-MDI(X). Diagnostic exhaustif des liaisons. Alimentation 12 ... 57 VDC montable sur profilé. Répond aux normes CEI 61850-3 et IEEE 1613.</p><ul><li>Débits de transmission des données de 100 Mbit/s</li><li>Commutation MDI/MDI-X automatique</li><li>Fonction Link Fault Pass Through (LFPT) pour une surveillance de transmission aisée</li><li>Structure réseau selon CEI 61850</li><li>IEEE 1613</li></ul>

2891156

Convertisseur fibre optique avec raccordement FO LC-Duplex (1300 nm), pour la conversion de 100BASE-TX en fibre de verre monomode. Fonction Auto-MDI(X). Diagnostic exhaustif des liaisons. Alimentation 12 ... 57 VDC montable sur profilé. Répond aux normes CEI 61850-3 et IEEE 1613.

<h3>FL MC 1000 ST - Convertisseurs fibre optique</h3><p>Convertisseur fibre optique avec raccordement fibre optique ST (1300 nm), pour conversion de 100BASE-TX en fibre de verre multimode. Fonction Auto-MDI(X) et diagnostic exhaustif des liaisons. Possibilité de montage sur profilé.</p><ul><li>Commutation MDI/MDI-X automatique</li><li>Débits de transmission des données de 100 Mbit/s</li><li>Fonction Link Fault Pass Through (LFPT) pour une surveillance de transmission aisée</li></ul>

2891321

Convertisseur fibre optique avec raccordement fibre optique ST (1300 nm), pour conversion de 100BASE-TX en fibre de verre multimode. Fonction Auto-MDI(X) et diagnostic exhaustif des liaisons. Possibilité de montage sur profilé.

<h3>FL MC 2000T ST - Convertisseurs fibre optique</h3><p>Convertisseur fibre optique avec raccordement fibre optique ST (1300 nm), pour conversion de 100BASE-TX en fibre de verre multimode. Fonction Auto-MDI(X) et diagnostic exhaustif des liaisons. Montage sur profilé DIN avec plage de température étendue.</p>

2891316

Convertisseur fibre optique avec raccordement fibre optique ST (1300 nm), pour conversion de 100BASE-TX en fibre de verre multimode. Fonction Auto-MDI(X) et diagnostic exhaustif des liaisons. Montage sur profilé DIN avec plage de température étendue.

Convertisseurs de média pour Ethernet