Dispositifs de protection

Temperature sensor C011-170, in accordance to DIN44081, white - green, 170°C

Temperature sensor C011-140, in accordance to DIN44081, white - blue, 140°C

Triple-temperature sensor C011-3-150, black - black, 150°C

The CM-MSS.12P belongs to the CM-MSS thermistor motor protection relay range. It operates with a rated control supply voltage of 24 V AC/DC and has a 1 c/o (SPDT) output with contacts rated at 250 V / 4 A. It features one sensor circuit to monitor PTC temperature sensors and works according to the closed-circuit principle. The relay will be reset automatically after the failure has been removed. A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers maintenance free Easy Connect Technology with push-in terminals.

The CM-MSS.22P belongs to the CM-MSS thermistor motor protection relay range. It operates with a rated control supply voltage of 110-130 V AC and 220-240 V AC and has a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A. It features one sensor circuit to monitor PTC temperature sensors and works according to the closed-circuit principle. The relay can be reset automatically, manually or remotely after the failure has been removed. A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers maintenance free Easy Connect Technology with push-in terminals.

The CM-MSS.32P belongs to the CM-MSS thermistor motor protection relay range. It operates with a rated control supply voltage of 24 V AC/DC and has a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A. It features one sensor circuit to monitor PTC temperature sensors and works according to the closed-circuit principle. The sensor circuit of this CM-MSS.32P is short-circuit, as well as interrupted-wire monitored and the relay can be reset automatically, manually or remotely after the failure has been removed. This protection relay is certified according to the ATEX directive 94/9/EC and is equipped with a reset / test button. A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers maintenance free Easy Connect Technology with push-in terminals.

The CM-MSS.33P belongs to the CM-MSS thermistor motor protection relay range. It operates with a rated control supply voltage of 110-130 V AC and 220-240 V AC and has a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A. It features one sensor circuit to monitor PTC temperature sensors and works according to the closed-circuit principle. The sensor circuit of this CM-MSS.33P is short-circuit, as well as interrupted-wire monitored and the relay can be reset automatically, manually or remotely after the failure has been removed. This protection relay is certified according to the ATEX directive 94/9/EC and is equipped with a reset / test button. A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers maintenance free Easy Connect Technology with push-in terminals.

The CM-MSS.21P belongs to the CM-MSS thermistor motor protection relay range. It operates with a rated control supply voltage of 24 - 240 V AC / DC and has a 1 n/c + 1 n/o (SPDT) output with contacts rated at 250 V / 4 A. It features one sensor circuit to monitor PTC temperature sensors and works according to the closed-circuit principle. The sensor circuit of the CM-MSS.21P is short-circuit, as well as interrupted-wire monitored and the relay will be reset automatically after the failure has been removed. This protection relay is certified according to the ATEX directive 94/9/EC. A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers maintenance free Easy Connect Technology with push-in terminals.

The S802PV-M100-H is a 2-pole polarized disconnector for photovoltaics. It can be used for currents up to 100A and has a rated operational voltage of 1000V DC by only 54mm width. The rated short-term withstand current Icw is 1.5kA. The S802PV-M100-H complies with IEC/EN 60947-3. It has numerous of approvals, therefore it can be used worldwide. The extensive range of accessory makes the use of S802PV-M100-H more comfortable.

S802PV-SD32 2 Pole DC main switch 32A 1.5kA 800VDC DC main switch

Connecteur de rechange pour protection d'appareil de type 3 de la gamme de produits PLUGTRAB SEC T3. Tension nominale 230 V.

Connecteur de rechange pour protection d'appareil de type 3 de la gamme de produits PLUGTRAB SEC T3. Tension nominale 24 V.

Connecteur de rechange pour protection d'appareil de type 3 de la gamme de produits PLUGTRAB SEC T3. Tension nominale 60 V.

The CM-MSE relay is from the CM thermistor motor protection relay range. This relay operates with a rated control supply voltage of 110-130 V AC and has a 1 n/o output contact rated at 250 V / 4 A. It features one sensor circuit for monitoring of PTC temperature sensors or bimetals. This relay offers automatic reset and works according to the closed-circuit principle. A sealable transparent cover for protection against unauthorized changes is available as accessory

The CM-MSE relay is from the CM thermistor motor protection relay range. This relay operates with a rated control supply voltage of 24 V AC and has a 1 n/o output contact rated at 250 V / 4 A. It features one sensor circuit for monitoring of PTC temperature sensors or bimetals. This relay offers automatic reset and works according to the closed-circuit principle. A sealable transparent cover for protection against unauthorized changes is available as accessory

Dispositif paratonnerre / parafoudre pour systèmes à tension continue PV à 2 pôles, isolés et mis à la terre de 1 000 V DC, pour montage sur rail DIN, élément de base à 4 pôles avec contact de télésignalisation, quatre éléments de protection enfichables, avec contrôle de la température, affichage de l'état sur chaque connecteur.

Parafoudre pour systèmes à tension continue PV à 2 pôles, isolés et mis à la terre de 1500 V DC, pour montage sur rail DIN, élément de base à 3 pôles, trois éléments de protection enfichables, avec contrôle de la température, affichage de l'état sur chaque connecteur.

Parafoudre pour systèmes à tension continue PV à 2 pôles, isolés et mis à la terre de 1 500 V DC, pour montage sur rail DIN, élément de base à 3 pôles avec contact de télésignalisation, trois éléments de protection enfichables, avec contrôle de la température, affichage de l'état sur chaque connecteur.

Parafoudre basse tension de type 3 pour montage fixe sur des prises de courant de sécurité. Circuit à surveillance thermique, indication optique de défaut.

Fiche de protection contre les surtensions de type 2 - VAL-MS 320 RW ST