2TLA030054R0000
By ABB
ABB2TLA030054R0000
Distributeur OfficielINCA emergency stop button with DYNlink signal for panel mounting. Status LED in button.Terminal block. 22.5 mm mounting hole.
Spécifications techniques
Dimensions
| Produit Longueur Net | 32,2 mm |
| Produit Hauteur Net | 32,2 mm |
| Produit Largeur Net | 80 mm |
| Poids net | 0,045 kg |
Technique
| Performance Level (PL) | Up to e |
Pourquoi Proax pour ABB 2TLA030054R0000?
Proax est un distributeur autorisé de ABB 2TLA030054R0000 et l'un des plus grands distributeurs de ABB en Amérique du Nord. Notre équipe technique interne, qui est hautement qualifiée, est prête à répondre à vos besoins techniques!
Avez-vous une question? pour vous aider à obtenir le bon produit le plus rapidement possible pour votre projet. Nous sommes toujours là pour vous aider!
Délai de livraison court
Personnel qualifié
Chat en direct
Support technique
Inventaire local
60+ ans d'expérience
Recommandé
Vital 1 Safety controller with relay outputs 2NO, +24 VDC supply voltage and detachable screw terminals.For monitoring of safety devices, such as emergency stops, using DYNlink.Vital 1 is a configurable safety controller that does not require programming. It uses the DYNlink system, which allows up to 30 safety devices to be connected in series to the same circuit, while achieving PL e / SIL 3. The DYNlink circuit is a unique solution that uses one single channel to achieve upt to Cat.4/PL e. Using DYNlink reduces the installation and engineering time thanks to simple installation with serial connection using M12 connectors. Vital 1 can only be used with DYNlink safety devices, such as Eden DYN and devices with a Tina adapter.
Eden is a non-contact safety sensor used as interlocking device for e.g. doors and safe position monitoring. Adam safety sensor with DYNlink signal and information output. Used with an Eva actuator to form a non-contact safety sensor Eden. M12-5 male connector. Four pieces of DA 1B distance plates and four pieces of DA 2B distance rings are included.Adam senses the presence of Eva without mechanical contact and therefore without any wear. The compact size of Eden and its 360°mounting possibility make it easy to use in most applications.Eden is UL approved for use in US and Canada.
Reset button in Smile enclosure, 1 x NO button, 1 x Blue LED, 1 x M12-5 male connector.
Reset button in Smile enclosure, Pluto Lightbutton connection, 1 button+Blue LED, 1 x M12-5 male connector.
Reset button in Smile enclosure for local reset of Adam Reset M12-5. Blue LED, M12-5 male + female connectors.
Reset button in Smile enclosure for local reset of Adam Reset M12-8. Blue LED, M12-8 male + female connectors.
Emergency stop button for panel mounting, 22.5 mm holes, 2 NC contacts, status LED in button, terminal blocks.
Safety stop (black button) for panel mounting, 22.5 mm holes, 2 NC contacts, status LED in button, terminal blocks.
Emergency stop button for panel mounting, 22.5 mm holes, Tina adaptation to DYNlink and StatusBus functionality, Indication LED in button, detachable terminal blocks.
Emergency stop button in Smile enclosure, 2 x NC, Status LED in button, 1 x M12-5 male connector.
Emergency stop button in Smile enclosure, 2 x NC, Status LED in button, 1 x M12-5 male connector, reversed button attachement (from bottom).
Emergency stop button in Smile enclosure, 2 x NC, Status LED in button, 1 x M12-5 male connector and 1 x M12-5 female connector.
Emergency stop button in Smile enclosure, 2 x NC, Status LED in button, 1 meter cable 5 leads out of bottom.
Emergency stop button in Smile enclosure, 2 x NC, 1 meter cable 4 leads out of bottom.
Machine stop(Black button) in Smile enclosure, 2 x NC, Status LED in button, 1 x M12-5 male connector.
Push button box according to Smile design with 4 buttons, one of which is an emergency stop. The box is adapted for connection to Pluto IQ using lightbutton function. Connection via a M12-8 male connector.- Emergency stop button in Smile enclosure, Tina adaptation unit to DYNlink included, Status LED in button, 1 x M12-5 male connector.
