En Vedette
2966197
PHX2966197
Weight 0.04 kg
Distributeur Officiel
PLC-RSC-120UC/21 - Relay Module
PLC-INTERFACE, consisting of basic terminal block PLC-BSC.../21 with screw connection and plug-in miniature relay with power contact, for assembly on DIN rail NS 35/7,5, 1 changeover contact, input voltage 120 V AC/110 V DC
- Slim design
- Efficient connection to system cabling using V8 adapter
- Safe isolation between coil and contact side
- RT III sealed relay
- Integrated input circuit and interference suppression circuit
- Functional plug-in bridges
Documents
Spécifications techniques
Restriction de l'utilisation | CEM : produit de classe A, voir la déclaration du fabricant dans la zone de téléchargement. |
Type de note | Notes sur le fonctionnement |
Note | Pour les tensions supérieures à 250 V (L1, L2, L3), il faut installer une plaque de séparation PLC-ATP entre les borniers identiques de modules adjacents. Le pontage de potentiel est alors effectué avec FBST 8-PLC... ou FBST 500..... |
Largeur | 6,2 mm |
Hauteur | 80 mm |
Profondeur | 94 mm |
Température ambiante (fonctionnement) | -40 °C ... 55 °C |
Température ambiante (stockage/transport) | -40 °C ... 85 °C |
Degré de protection | IP20 (base du relais) |
Tension d'entrée nominale UN | 120 V AC |
Tension d'entrée nominale UN | 110 V DC |
Courant d'entrée typique à UN | 3,5 mA (à UN = 120 V CA) |
Courant d'entrée typique à UN | 3 mA (à UN = 110 V DC) |
Temps de réponse typique | 6 ms |
Délai de publication typique | 15 ms |
Circuit de protection | Pont redresseur Pont redresseur |
Affichage de la tension de fonctionnement | LED jaune |
Puissance dissipée dans les conditions nominales | 0.42 W |
Type de contact | 1 contact inverseur |
Type de contact de commutation | Contact unique |
Matériau de contact | AgSnO |
Tension de commutation maximale | 250 V AC/DC (La plaque de séparation PLC-ATP doit être installée pour des tensions supérieures à 250 V (L1, L2, L3) entre des borniers identiques dans des modules adjacents. Le pontage de potentiel est alors effectué avec FBST 8-PLC... ou ...FBST 500...) |
Tension de commutation minimale | 5 V (à 100 mA) |
Courant de commutation min. | 10 mA (12 V) |
Courant d'appel maximum | 10 A (4 s) |
Limitation du courant continu | 6 A |
Pouvoir de coupure (charge ohmique) max. | 140 W (à 24 V DC) |
Pouvoir de coupure (charge ohmique) max. | 20 W (à 48 V DC) |
Pouvoir de coupure (charge ohmique) max. | 18 W (à 60 V DC) |
Pouvoir de coupure (charge ohmique) max. | 23 W (à 110 V DC) |
Pouvoir de coupure (charge ohmique) max. | 40 W (à 220 V DC) |
Pouvoir de coupure (charge ohmique) max. | 1500 VA (pour 250 V AC) |
Capacité de commutation | 2 A (à 24 V, DC13) |
Capacité de commutation | 0,2 A (à 110 V, DC13) |
Capacité de commutation | 0,1 A (à 220 V, DC13) |
Capacité de commutation | 3 A (à 24 V, AC15) |
Capacité de commutation | 3 A (à 120 V, AC15) |
Capacité de commutation | 3 A (à 230 V, AC15) |
Tension d'essai | 4 kV AC (50 Hz, 1 min., enroulement/contact) |
Mode de fonctionnement | Facteur de fonctionnement de 100 |
Indice d'inflammabilité selon UL 94 | V0 (logement) |
Durée de vie mécanique | 2x 107 cycles |
Position de montage | tous |
Instructions de montage | En rangées à espacement nul |
Méthode de connexion | Raccordement à vis |
Longueur de dénudage | 8 mm |
Filet de vis | M3 |
Section transversale du conducteur solide | 0,14 mm² ... 2,5 mm² |
Section transversale du conducteur flexible | 0,14 mm² ... 2,5 mm² |
Section transversale du conducteur flexible | 0,2 mm² ... 2,5 mm² (embout simple) |
Section transversale du conducteur flexible | 2x 0,5 mm² ... 1,5 mm² (embout TWIN) |
Section du conducteur AWG | 26 ... 14 |
Couple | 0,6 Nm ... 0,8 Nm |
Désignation | Normes/réglementations |
Normes/réglementations | IEC 60664 |
Normes/réglementations | EN 50178 |
Degré de pollution | 3 |
Catégorie de surtension | III |
Désignation | Essai de gaz corrosif |
Identification | ISA-S71.04. G3 Groupe dur |
Identification | EN 60068-2-60 |
REACh SVHC | Plomb 7439-92-1 |
REACh SVHC | Anhydride hexahydrométhylphtalique |
Chine RoHS | Respectueux de l'environnement Durée d'utilisation = 50 ans |
Chine RoHS | Pour plus d'informations sur les substances dangereuses, voir l'onglet "Téléchargements", catégorie "Déclaration du fabricant". |
Accessories
Pourquoi Proax pour Phoenix Contact 2966197?
Proax est le distributeur autorisé de Phoenix Contact 2966197. Chez Proax, nous sommes l'un des plus grands distributeurs de Phoenix Contact en Amérique du Nord. Notre équipe technique interne, qui est hautement qualifiée, est prête à répondre à vos besoins techniques!
Avez-vous une question? pour vous aider à obtenir le bon produit le plus rapidement possible pour votre projet. Nous sommes toujours là pour vous aider!
Délai de livraison court
Personnel qualifié
Chat en direct
Support technique
Inventaire local
60+ ans d'expérience
Recommandé
- The auxiliary contact blocks are used for the operation of auxiliary circuits and control circuits for standard industrial environments.Types of auxiliary contact blocks for front mounting:• CA4 1 or 4-pole block, with instantaneous N.O., N.C. contacts• CC4 1-pole block, with N.O. leading contact or N.C. lagging contact• CAT4 2-pole block, with instantaneous N.O. + N.C. contacts and A1 / A2 coil terminal connection on front face.Select the 4-pole auxiliary contact blocks CA4-..E, CA4-..M, CA4-..U or CA4-..N type, according to the contactor or contactor relay type for compliance with the standard requirements (see "Terminal marking and positioning").Types of auxiliary contact blocks for side mounting:• CAL4 2-pole block, with instantaneous N.O. + N.C. contacts.For clipping onto the right- and/or left-hand side of the contactors. The auxiliary contact blocks are equipped with screw type connecting terminals delivered open, protected against accidental direct contact and bear the corresponding function marking.
- The AF09-30-10-13 is a 3 pole - 690 V IEC or 600 UL contactor with 1 built-in auxiliary contact and screw terminals, controlling motors up to 4 kW / 400 V AC (AC-3) or 5 hp / 480 V UL and switching power circuits up to 25 A (AC-1) or 25 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.